S
Sam_ids
New Member
- Messages
- 1
- Reaction score
- 0
Hi, Ive been having this issue for months. any tips or suggestions would be greatly appreciated!
I am experiencing size differences (height and width) in the Zirconia crowns ive been milling.
almost half of the zirconia crowns from my Ceramill Motion 2 (nested with Ceramill Match 2) have been coming out shorter, and gapped with no mesial/distal contact.
I am also using VHF to CAM and nest on another mill.. (these come out perfect in size and fitment everytime)
I use the same zirconia discs on both and imput the discs by Scale Factor.
I recently calibrated my ceramill motion 2 (5-axis)
another thing to note is my ceramill uses 2.5, 1.0 and 0.6 burs (currently using CeraDirect DC)
the other machine uses 2.0, 1.0 and 0.6 burs (VHF K4-DLC)
maybe settings in the ceramill motion 2?
I am experiencing size differences (height and width) in the Zirconia crowns ive been milling.
almost half of the zirconia crowns from my Ceramill Motion 2 (nested with Ceramill Match 2) have been coming out shorter, and gapped with no mesial/distal contact.
I am also using VHF to CAM and nest on another mill.. (these come out perfect in size and fitment everytime)
I use the same zirconia discs on both and imput the discs by Scale Factor.
I recently calibrated my ceramill motion 2 (5-axis)
another thing to note is my ceramill uses 2.5, 1.0 and 0.6 burs (currently using CeraDirect DC)
the other machine uses 2.0, 1.0 and 0.6 burs (VHF K4-DLC)
maybe settings in the ceramill motion 2?