WorkNC + Rhein

[Profesional Dreamer]

Hi,
I am looking for someone who uses WorkNC and mills Rhein . I have a problem with the file rhein.wncdi WorkNC does not detect the hole after conversion tootpath. Does anyone mills bars with Rhein attachments.
Does anyone have a file rhein.wncdi and send it to me.
Thanks in advance

https://drive.google.com/file/d/0B1_PcDoKjApJWEptQkxwQmJHTU0/view?usp=sharing

 

[Profesional Dreamer]

https://drive.google.com/file/d/0B1_PcDoKjApJZlAxSExZeEF5dTg/view?usp=sharing

WokNc does generate the drilling toolpath of Rhein. Someone can help ?

 

[French Cadman]

Maybe the hole is too high (and too long ...) on the WNC file (?)


I had this problem with implants but we can correct and adjust the right height , if you have stl, I can look ....

 

[rkm rdt]

Maybe the hole is too high (and too long ...) on the WNC file (?)


I had this problem with implants but we can correct and adjust the right height , if you have stl, I can look ....

Welcome back old friend, you have been in our thoughts.

 

[French Cadman]

Thank my friend !

 

[Profesional Dreamer]

Thank you for your interest.

https://drive.google.com/file/d/0B1_PcDoKjApJaF9aRzVGTC0yekE/view?usp=sharing

 

[French Cadman]

I look your file as I have time !

 

[Profesional Dreamer]

Ok I'll be weaiting

 

[Jean-Michel BERTIN]

I can see it