B
Bassam
Member
Full Member
- Messages
- 46
- Reaction score
- 0
This still strikes me as a zimmer, though it is really hard to tell a zimmer from a BioHorizons. The x-ray looks like it could be larger than a 3.0 just because of the difference in width between the inner interface and the outer diameter, but as I've said, it is very difficult to tell.Here is the XRAY?s
yikes, is that a broken off screw in there? lolHere is the XRAY?
The implant is 3.7 Legacy from Implant Direct. However the abutment is for 3.7 ScrewPlant from Implant Direct and is the wrong abutment for Legacy. DarwinI am trying to find out what implant is this?
Dentix appears to be standard internal hex 3.5 platform, like Zimmer Screw-Vent or Implant Direct Legacy 3.5 platform. DarwinWe have a Dentix implant that we are restoring. Any ideas of compatability with Dentix? It looks to be from either Romania, or Mexico. View attachment 40866
This appears to be 3.7 Legacy (3.5 platform) from Implant Direct. DarwinHere is the XRAY?
Darwin will know since he is with Implant Direct now, but wonder if you can shareThe implant is 3.7 Legacy from Implant Direct. However the abutment is for 3.7 ScrewPlant from Implant Direct and is the wrong abutment for Legacy. Darwin
Thank you for sharing!The screwplant has an outside bevel on implant. Somewhat like straumann tissue level. But the hex is the same between legacy and screwplant
exocad.com has an alfa-gate libraryanyone ever work with Alpha Gate implants
any thoughts on where i could get the implant library
https://alfa-gate.com/
i would need the DME file for 3 shape
alpha gate is compatible with sirona / we don't have in lab
Contact TruAbutment, they have the analogs, digital analogs and scan bodies/library if you want to design up for a custom titanium. Sorry I'm late to the party, just saw this.We have a Dentix implant that we are restoring. Any ideas of compatability with Dentix? It looks to be from either Romania, or Mexico. View attachment 40866