Sevan P
Well-Known Member
Full Member
- Messages
- 3,418
- Reaction score
- 641
Sup gang.
So after watching that recently posted Glidewell Abutment Design video I realized that since what ever old version of 3shape that was designed on we no longer have the retentive wall plane thingamachingy available anymore. I think these attachments will come in very handy.
So I decided to create something real quick that will replace the missing stuff.
I always find myself wanting a 2.5 hole when the 3mm hole is too big, that's why I made the hole and Cylinder attachments.
In the DME file there is a Hole 2.5x5.0, Hole 3.5x5.0, Cylinder 2.5x5.0, Cylinder 3.5x5.0 then a flat wall with on side Chamfered @ 45 degrees and the other side with 90 corners, this will come in very hand for a lot of thing. Simply import the DME file and they are already linked them to the hole/Cylinder category and I created the Retention Wall category so it should show up in the drop down window. Let me know if they do not, or you can simply add them to the needed category in the control panel.
2015 (3.1)
https://www.dropbox.com/s/yg1v3c6wk9yhqxa/Custom Attachment 2015.dme?dl=0
2014 (2.9.9.5)
https://www.dropbox.com/s/5k7zf3cn38yly89/Custom Attachments 2014.dme?dl=0
Let me know what you guys think or if there is a request that I can conjure up in Solidworks.
Sevan
So after watching that recently posted Glidewell Abutment Design video I realized that since what ever old version of 3shape that was designed on we no longer have the retentive wall plane thingamachingy available anymore. I think these attachments will come in very handy.
So I decided to create something real quick that will replace the missing stuff.
I always find myself wanting a 2.5 hole when the 3mm hole is too big, that's why I made the hole and Cylinder attachments.
In the DME file there is a Hole 2.5x5.0, Hole 3.5x5.0, Cylinder 2.5x5.0, Cylinder 3.5x5.0 then a flat wall with on side Chamfered @ 45 degrees and the other side with 90 corners, this will come in very hand for a lot of thing. Simply import the DME file and they are already linked them to the hole/Cylinder category and I created the Retention Wall category so it should show up in the drop down window. Let me know if they do not, or you can simply add them to the needed category in the control panel.
2015 (3.1)
https://www.dropbox.com/s/yg1v3c6wk9yhqxa/Custom Attachment 2015.dme?dl=0
2014 (2.9.9.5)
https://www.dropbox.com/s/5k7zf3cn38yly89/Custom Attachments 2014.dme?dl=0
Let me know what you guys think or if there is a request that I can conjure up in Solidworks.
Sevan
