3M ESPE LAVA CNC 500 BARCODE

M

mlinka

New Member
Messages
1
Reaction score
0
Hello everyone, hope you have a good day.
I am the new user of the 3M ESPE LAVA CNC 500.
I don`t have any CAM software for it and would like to test the machine with some milling programs that I found on the machine.
The question I have if anyone can help: how would I associate a barcode to specific milling program?
One folder is network shared: "CNC" so I believe the previous user used network cable to transfer the milling program to the machine.
And I also found the milling programs in folder: "NC_Prog" that is in "TwinCAT_Data" folder.

File number 1 is called L1:
L1
(210200692379026.nc)
M61@714
R40=28
R96=0
R95=210200692379026
R42=0 M60@714
M17

File number 2 is called L2:
L2
(210200692379026.nc)
M61 @714
@111 R15 K0 K1
K1 K3
K2 K5
K3 K7
K4 K9
K5 K11
(OPERATION 1)
(FLATTENING OCCLUSAL SIDE)
(BALLMILL T21)
R15=0 M60 @714
R174=1 M60 @714
N1 ()
T21 L2106
M61 @714
R43=2 M60 @714
(TCend.txt)
G0 Z85
G0 X0 Y0
G17 S18500 M3
M7
(sP.txt)
G0 Z85
G0 X0 Y0
M58@716
F1500
G0 X8.694 Y0.
G00 Z15.
G0 Z8.6
F500
G1 Z7.116
F1500
G1 X7.6
G1 Y7.955
...

What barcode should I use to start this program?

Thank you very much, and I am willing to pay a 6-pack over PayPal for help.
Kind Regards.
 

Similar threads

DMC
Replies
15
Views
4K
labdude
L
Top Bottom