I post on my own behalf not a manufacturers but I will make sure not to mention the product I use next time, just the technique. This is a first, for sure.
I post on my own behalf not a manufacturers but I will make sure not to mention the product I use next time, just the technique. This is a first, for sure.
Thanks Tom, just trying to keep it fair, in all my years of acrylic work I have never used the Microwave, but processed bases we used to do a bunch of.
Clear processed bases used to be the rage back in the day, haven't done one in some time now.
This is being done on soft tissue not hard structures so I prefer a wash in the finalized setup and not to be locked into the first impression. That is however the opinion of a broker that just orders a bunch of dentures he has to stand behind.
The only thing we should ask of those posting how they do it is if they have a financial dog in the fight with regards to materials used. They need to be transparent and very plainly state that.
TomZ is a technical asset to any forum and I would hate to see him stop posting here or anywhere.
I don't think you understand Mr.Broker. The baseplate is made from the master impression and the putty model is only for articulation. Once the try-in is approved, you pour stone into the processed base for the first pour. That keeps the base from changing fit from the border molded master it was made from.
I am wondering if Tokoyama Softreliner M could be utilized as a permanent (2 years) wash on the upper denture base. I am thinking that even thinly spread it might hold up. I know it can be used on the lower....
We have been taught that post delivery there are two critical times where adjustments might be made after some tissue modeling has done. One is 48 hours post insert and another is 2 weeks post insertion which is usually scheduled for a clinical remount for final occlusal equilibration....While I like the idea of using a stabilized baseplate I am not certain of its definitive use.
Fielded several calls/emails about microwave curing and its use with wrought or cast frames. In order to illustrate the non-issue, I microwave cured a dime using a clear version of my material of preference. Crystal clear with no arcing or burning as some were concerned about.
Do you send out a VLC or vacuum form baseplate for the clinician to mark and trim to the vibrating line prior to fabricating the processed baseplate with a post dam?
Vibrating line disclosure is achieved through inflation, mirror palpation, and marking with blue pencil during the master impression. The pencil line transfers on the impression, post dam is carved on the model and the baseplate is then processed on the model. This stuff isn't rocket science.
I agree fully TZ...All too often we have to guess where it is....Sometimes right and others not...This method gets rid of the guessing.....Would you use indelible pencil?
Research I have read indicates that the post palatal border only coincides with the common default post dam position ie; hamular notch and fovea bisection about 60% of the time. Yes, an indelible blue pencil.