C
Cinkor
Member
Full Member
- Messages
- 5
- Reaction score
- 1
I am planing to buy the complete system from Amann Girrbach Ceramill Motion2 and Map400 can anyone recommend the system???
We bought the system almost 4 years ago and haven't had any issues.
We scan and design using both the Amann Map 400 and a 3Shape system as well and it accepts the files no problem.
It's a little more closed in certain aspects compared to a "pure" Exocad system, but the upside is turn-key convenience and solid support from the manufacturer. Since they control the chain, it's easier to troubleshoot, less variables than a system that you piece together.
Amann Girrbach also have a really solid offer when it comes to consumables. Their Zirconia (Zolid FX ML) is really nice, they have good PMMA materials, support milling e.max blue blocks and can even mill Titanium abutments.
For Zirconia sintering, make sure to get the Therm S furnace. We have the older Therm 3 and it doesn't go up high enough to sinter some Zirconias such as Noritake Katana, so the new Therm S (made by Dekema) is a more flexible choice.
If this is your first (and only) CADCAM system, I would say go for it and as your needs evolve, you can add more machines to it.
everyone starts out wanting a solution to a problem, and most people end up engineering their own solution.When I ask them in Chicago if I'm able to design supra-structures over parallel milled implant bars, the answer was: there is a way to do it but there is no software for it. Which give me question marks to think when a colleague in Germany does it all the time. So, it's really some how a closed system. On the other hand you right that mixing units together can be painful until you get the system work. Having need a help means calling different companies for answers. Spending over 80k without a test drive like everyone does with a car is scary by just trusting the sales person and there are no independent test reviews like with cars. Therefor I really appreciate all your input. Thank you.
Hello Cinkor, I would love to speak with you about the mill. Please check out our website at www.axsysdental.com you can reach me at 248.926.8810 or 734.260.3022I am planing to buy the complete system from Amann Girrbach Ceramill Motion2 and Map400 can anyone recommend the system???