N
Nick Woj
New Member
- Messages
- 1
- Reaction score
- 0
I have noticed an inconsistency with occlusion over the years with CAD/CAM. I don't know if it is the software or if it is more to do with the mill. I always double check the articulation while designing the crown to make sure that the scan wasn't off. I also cut to the opposing at .25 but still occasionally get some high bites, not many but getting tired of someone walking a wax unit back to me to make an adjustment that takes less time then the walk to me. Does anyone have any usefully information that might help.
Keep in mind:
1.) Machines are regularly calibrates and always kept clean
2.) Bites are checked during design and made sure that there is contact on neighboring teeth
Keep in mind:
1.) Machines are regularly calibrates and always kept clean
2.) Bites are checked during design and made sure that there is contact on neighboring teeth