F
Freakin teeth
Member
Full Member
- Messages
- 29
- Reaction score
- 2
Jean-Michel - can you tell me how this material reacts with investing techniques. With some materials you can get fins, can only rapid fire, etc.
Yeah, buy an AsigaHEy guys
We recently began printing models in a formlabs printer from our 3shape
Models look good
But main issue is sloppy fit of dies in model
They are fully seated but a ton of wiggle room
Any help or thoughts on how to fix this issue ?
Lol Asiga models have the same problem it’s the model builder files and those fins on the dies. As mentioned above just do a solid with separate check die. Not a printer problem so much as a software problem.Yeah, buy an Asiga
That's how we scan in our models on 3shape.I would totally forget about a removable die. I chased that forever and was never satisfied. You really don't need it anyways and all it does is introduce inaccuracies. Solids and 2 seperate dies for me on my formlabs.
You like your Asiga?...you make anything else with it besides Models? What version do you have? Whip Mix been good to you? Did you do a cost analysis to figure out how much each digital model you print cost you?Yeah, buy an Asiga
Can't rave enough about Asiga. I print models, castables, temporaries, partial frameworks, etc. Works wonderfully. I've got the MAX. WhipMix has outstanding customer support. Anytime I have an issue (which is incredibly rare),I call up @Cory@WhipMix and he helps me out right away. I've done cost analysis on models for us, but it really depends on your model building software and and technique.You like your Asiga?...you make anything else with it besides Models? What version do you have? Whip Mix been good to you? Did you do a cost analysis to figure out how much each digital model you print cost you?
I'm guessing you are a 3Shaper?...if not, please continue reading As for model building software, exocad has only one, or are you insinuating the adaptors/connectors to place a vertex or orbix on it, care to share the cost analysis.Can't rave enough about Asiga. I print models, castables, temporaries, partial frameworks, etc. Works wonderfully. I've got the MAX. WhipMix has outstanding customer support. Anytime I have an issue (which is incredibly rare),I call up @Cory@WhipMix and he helps me out right away. I've done cost analysis on models for us, but it really depends on your model building software and and technique.
Nope, not a 3Shape-er. Currently using Dental Wings. What I mean is it depends on the kind of models you print. I print hollow models, which radically cuts down on the resin/tray usage. Our cost analysis comes out to in between 2-3 bucks per quadrant and 4-5 per full arch. These are rough averages. Actual numbers may vary slightly.I'm guessing you are a 3Shaper?...if not, please continue reading As for model building software, exocad has only one, or are you insinuating the adaptors/connectors to place a vertex or orbix on it, care to share the cost analysis.
so I'm trying to decide between the max and the bego varseo (2?) . Bego seems more expensive but the Max looks like it has an open resin tray.Nope, not a 3Shape-er. Currently using Dental Wings. What I mean is it depends on the kind of models you print. I print hollow models, which radically cuts down on the resin/tray usage. Our cost analysis comes out to in between 2-3 bucks per quadrant and 4-5 per full arch. These are rough averages. Actual numbers may vary slightly.
We'll be switching to new CAD software within a couple months. Right now, it's looking like we'll go with 3Shape because their removable modules seem to be way ahead of Exo, particularly dentures.It's 3 Sheep
as in baaaad aaaass!
Bego's cartridges were actually one of the reasons I eliminated them from my list. They're very expensive. I use 4-5 different resins, and if I had a Bego, I'd have an additional few thousand bucks wrapped up in cartridges. I've never really had an issue with keeping my Asiga trays clean. Like, not a single issue. Just keep the hood down, and you're fine. The nice thing about Asiga trays is that they're actually a better deal than they sound because they're reversible. There's an RFID on both sides, so with a 1-liter tray, you can actually print 2-liters of resin. Same with 2 liter, 5 liter, etc. WhipMix resins are less expensive, but it's irrelevent. Both printers are open, so you can use whatever resins you want. I think the Bego is a good printer, but I much prefer the Asiga. The cylinder can thingy is a big negative for me. It's a more complicated apparatus, which introduces more room for error.so I'm trying to decide between the max and the bego varseo (2?) . Bego seems more expensive but the Max looks like it has an open resin tray.
I know support is paramount,especially for the digitally challenged like me, but the resin cartridge looks cleaner than an open tray. Is that important/
I think the Whip Mix resins are less expensive than Bego's?