D
ddsTech
Member
Full Member
- Messages
- 53
- Reaction score
- 7
I'm looking for a used 4-axis desktop mill with CAM software (preferably SUM 3D). If there's someone out there with an extra mill they are no longer using, please let me know what you have and what price you're looking to get. Here's what I'm after:
- 4-axis desktop mill - low hours and very good condition. Current model (within the last few years).
- CAM software - current version, preferably SUM 3D or equivalent
- Open system - regarding stl input, milling material selection, and continued operation without mandatory manufacturer updates for mill or CAM.
The scanner I'll be using with the system is a Medit SE.
If you're near Minnesota, I'll come take a look at what you have and see it in action prior to purchase.
Thanks!
Mark
- 4-axis desktop mill - low hours and very good condition. Current model (within the last few years).
- CAM software - current version, preferably SUM 3D or equivalent
- Open system - regarding stl input, milling material selection, and continued operation without mandatory manufacturer updates for mill or CAM.
The scanner I'll be using with the system is a Medit SE.
If you're near Minnesota, I'll come take a look at what you have and see it in action prior to purchase.
Thanks!
Mark