Search results

Mill is fully functional and Has all the original accessories with it. I did a calibration and boxed it up almost 2 years ago. Too nice of a mill to be on a shelf, great little workhorse. $5500. Cam can be opened up by Jensen if that is desired or it will work with open cam from other vhf...

Looking for a lab to outsource PMMA and ZR screw retained full arch "Hybrid" restorations to. I am specifically referring to the ti base type. The lab I am currently using is consistently not meeting dead lines. These are a big investment for every one involved and they need to be on time. I am...

Is there anyone on here with any experience using or milling peek from cad design. I have a case that I feel this may be appropriate for an would like to find out who (if anyone is) is knocking it out of the park.

Any one having great success with the Multi ingot? I am looking to outsource some units from a cad design in shade B-1 just to see how they look. PM me turnaround time and cost please, or a recommendation of a lab to contact would be excellent as well. Thanks in advance!

I am looking to outsource my .stl designs to gain more control of design and emergence profile as compared to Atlantis. I am seeking a recommendation for a milling center who will do these timely, accurately and predictably. I have tried a few and have had negative experiences so far. The way...

This is a astra case being restored with 2-connect but I am a little concerned. These analogs are both from astra, but the fit is inconsistent from the 3.5-4.0 to the 4.5-5.0. Even if this is ok to be this way it would look odd in an x-ray to say the least. Can any one say with any certainty...

Lava plus zirconia with very slight inc cutback with incisal protection. Has 4 Bio-Horizon implants, mock up tried in and approved.

Is there anyone out there currently milling implant frameworks out of chrome cobalt with angled screw access channels. If so who, and what screw and driver combos are acceptable for this technique. I am only familiar with the dynamic 3.0 from Talladium. Also the case is on Bio Horizon implants...

How hard is it to create custom material files in exo-cad? Such as an emax posterior, anterior,or pfm frame ect. Different fit and minimum thicknesses ect to avoid having such lengthy artistic case logins.

Are there any custom abutment providers that can provide tapped abutments ready for fixation screw placement. If not how difficult is it to tap titanium. Is there a system that is better than others for this? I have only used this technique a few times and only once in a ti stock ankylos...

Requirements, must be proficient at attachments, reasonable turnaround(10 days or less door to door),and consistent adaptation to features such as stress distributors and milled lingual crown designs. Our lab is full service and we do a fair amount of these cases. Our current casting lab is not...

<iframe width="640" height="360" src="http://www.youtube.com/embed/-mDX0O0oRCo?feature=player_detailpage" frameborder="0" allowfullscreen></iframe>

Posting this just for fun, I thought disturbed would enjoy it the most! http://abclocal.go.com/ktrk/video?id=9043508&pid=9043507

Many techs and docs alike mention and post excellent pics with a multitude of lenses. I have a Nikon D90 and am in the market for a macro lens and would like to know the advantage of or disadvantage of large and small lenses...105, 90, ect. Cost of entry is much higher on the large lens but will...

Digital Imaging | Dental Practice Management Software & Solutions | Diagnostic Radiology | Dental Systems Yay! One of many more I'm sure.

E4D Nevo - Home

I was at the Midwest Dental Lab exhibition this weekend and we heard from Bennett Napier claim that NADL believes 30 to 40% of lab work is now going off shore. Does that sound high to anyone.

Does anyone care to give a review on the whip-mix pro press 200. Specifically for pressing Emax and we may experiment with split files and press to whatever in the future. Thanks for any help.

Hi, any suggestions or insight welcomed. We are taking the hood of our mini for cleaning and a couple accessory add-ons. We have the suggested lube for the guides but we have called two dealers and have not found anyone carrying the grease for the ball-screw bearings or what ever they are...

I was recently given an enticing quote and per abutment cost that seemed very good from my nobel rep. I was hoping someone who is a user could give me a honest review of the software and scanner. Our lab is restoring a fair amount of these cases and our margin using Atlantis is poor. I am going...