P
PinAn
Active Member
Full Member
- Messages
- 207
- Reaction score
- 0
Hi guys, I read some paper at Internet about dental porcelain boding with metal
If just with Co-Cr and Ni-Cr the bonding strength value is around 26~30Mpa
And if the porcelain with Grade5Ti or CP Ti
The value is 26Mpa and if with GC the value will up to 30~35Mpa
Looks like the bonding strength wasn't the main problem with Ti PFM
So what is the truly problem you guys found with Ti PFM?
Thanks
If just with Co-Cr and Ni-Cr the bonding strength value is around 26~30Mpa
And if the porcelain with Grade5Ti or CP Ti
The value is 26Mpa and if with GC the value will up to 30~35Mpa
Looks like the bonding strength wasn't the main problem with Ti PFM
So what is the truly problem you guys found with Ti PFM?
Thanks