MikeW
Member
Full Member
- Messages
- 62
- Reaction score
- 12
Hey guys, I'm putting together a comparison of different CAD output files that are being generated between different CAD systems in the open .STL Format for a program I'll be presenting at Lab Day Chicago.
I have 3Shape files but I'm looking for examples of Crown & Bridge files from other CAD systems such as:
What I'm ideally looking for is a Crown and a Bridge from each system with the version of the CAD software that you're using to output the .STL with.
I figure it's great information to have since not all CAD systems output these .STL files in the same manner / resolution. I'd be glad to share the findings of my results with you guys here for your help!
You can email these samples over to me directly HERE or send me a dropbox link to download the files.
Thanks,
MikeW.
I have 3Shape files but I'm looking for examples of Crown & Bridge files from other CAD systems such as:
- Sirona inLab
- Exocad - No More Files Needed - Thanks 2thm8kr & Gru
- DentalWings
- WorkNC Dental
- Nobel Biocare (if they output .STL)
- E4D - No More Files Needed - Thanks 2thm8kr
What I'm ideally looking for is a Crown and a Bridge from each system with the version of the CAD software that you're using to output the .STL with.
I figure it's great information to have since not all CAD systems output these .STL files in the same manner / resolution. I'd be glad to share the findings of my results with you guys here for your help!
You can email these samples over to me directly HERE or send me a dropbox link to download the files.
Thanks,
MikeW.
Last edited: