Sintering oven

A

Adva

New Member
Hello .
We are opening a new lab, and looking forward to buy a sintering furnace Shenpaz Sintra pro 120 is it a good furnace? Does it has any weak spots ?
Thank you
 
TheLabGuy

TheLabGuy

Just a Member
Full Member
Hello .
We are opening a new lab, and looking forward to buy a sintering furnace Shenpaz Sintra pro 120 is it a good furnace? Does it has any weak spots ?
Thank you
I have a Sintra Shenpaz, it's junk!!! For 10K buy yourself a Ivoclar S1 (Ivoclar does financing if you need that too). The elements are more expensive but the constituency/reliability is much better than a Shltpaz and you don't need to replace the elements nearly as much as the other ovens. Minh Vogt and Dekema also have very nice sintering ovens and worth mentioning as well.
 
OP
A

Adva

New Member
I have a Sintra Shenpaz, it's junk!!! For 10K buy yourself a Ivoclar S1 (Ivoclar does financing if you need that too). The elements are more expensive but the constituency/reliability is much better than a Shltpaz and you don't need to replace the elements nearly as much as the other ovens. Minh Vogt and Dekema also have very nice sintering ovens and worth mentioning as well.
Thank you for your review. I am also looking at Nabertherm LHT 02/17 LB, Mihm Vogt HTS-2 (some people say that sometimes it produces green zircnonia )
I know that many members of this forum have mihm Vogt and they are happy with them, but didn't find any threads about nabertherm LHT 02/17 LB..Can anyone tell something about this furnace ?
Dakema has Sic heating elements, as I was told they are not so reliable as MoSic, although Sic produces better quality of translucency.
 
RDA

RDA

Well-Known Member
Full Member
With two years in use, our Sintra NXS Plus has been wonderful. No issues. :Top:
 
Car 54

Car 54

Well-Known Member
Full Member
Didn't shenpaz have an issue with a low gauge wire or something like that was causing a shorting or heating problem, or was that with the older model?
 
Last edited:
TheLabGuy

TheLabGuy

Just a Member
Full Member
Didn't shenpaz have an issue with a low gauge wire or something like that was causing a shorting or heating problem, or was that with the older model?
Yep, I had to rewire mine...then always fighting with the elements made me want kick the neighbors dog...and I love dogs!!!
 
user name

user name

Well-Known Member
Donator
Full Member
I vote for Mihm Vogt.
I know a couple guys that like Nabertherm.
I like my Dekema, but only for lower temp Zr...1500 and under.
No experience beyond pressing ovens with them, but Id gamble on a Zubler.
 
RileyS

RileyS

Well-Known Member
Full Member
I bought, struggled with, and returned a shenpaz.
 
Guest Room
Help Users
  • No one is chatting at the moment.
  • Chat Bot:
    Room has been pruned!
    Chat Bot: Room has been pruned!
    Top Bottom