Full Zir anatomy.

[Macron Dental Lab]

Full Zir anatomy.

 

[CRWNMKR]

Nice detail, what system are you using?

 

[Vazone]

Full Zir anatomy.

do you sinter it without pearls ?

 

[Macron Dental Lab]

Yes no pearls

 

[Macron Dental Lab]

Dwx50

 

[Mark Jackson]

Dwx50

Sweet machine, huh? One of the best kept secrets in dental technology.

 

[NicelyMKV]

Changed my post. If it works for Marks huge operation it must be ok.

 

[Macron Dental Lab]

Glaze and done 3 steps crowns.

 

[NicelyMKV]

Nice work! What brand Zr u using?

 

[k2 Ceramic Studio]

Looks like an S1 sintering base, did you speed sinter those? Look nice by the way.

 

[Labwa]

nice!

 

[Macron Dental Lab]

90 min Speed sinter program, the zir brand is preshade zirlux.

 

[French Cadman]

Nice !

What is the size of the smallest tool on DW50 ?

 

[rlhhds]

90 min Speed sinter program, the zir brand is preshade zirlux.

What sintering oven and what are the firing paramters?

 

[Buried1999]

Nice !

What is the size of the smallest tool on DW50 ?

I am also interested in this question and what is your CAM?

 

[Macron Dental Lab]

Nice !

What is the size of the smallest tool on DW50 ?

Well it is a 0.4mm but you need a open cam soft so you can select any tool size and modifications of the tool path, and set the occlusal as extra surface sensitive cavity. This tool is only for the anatomy grooves, but for the rest of the crown a 0.8mm tool work the best for me.

 

[Macron Dental Lab]

What sintering oven and what are the firing paramters?

Ivoclar S1 and the sintering programs are preset already.

 

[rlhhds]

Ivoclar S1 and the sintering programs are preset already.

The programs are preset yes, but what is the program parameters you are running in that oven. I do not have the Ivoclar S1.

Thanks, Randy

 

[French Cadman]

Well it is a 0.4mm but you need a open cam soft so you can select any tool size and modifications of the tool path, and set the occlusal as extra surface sensitive cavity. This tool is only for the anatomy grooves, but for the rest of the crown a 0.8mm tool work the best for me.

Choose the size of the tools is a good thing !
0.4 is perfect for details ....


Thanks !

 

[Macron Dental Lab]

Choose the size of the tools is a good thing !
0.4 is perfect for details ....


Thanks !

This are my tools and camsoft settings.