Full Contour Zirconia

[Axis Dental Milling]

I hold the disc in my hand and just work it up and down and follow the contours of the adjoining teeth. I saw a guy do this on a full arch type case.

So you like to stroke your disc up and down

 

[NicelyMKV]

So you like to stroke your disc up and down

How else will I keep my gadgets charged up?

http://www.engadget.com/2015/03/05/wankband-solo-sex-gadget-charger/

 

[2thm8kr]

How else will I keep my gadgets charged up?

http://www.engadget.com/2015/03/05/wankband-solo-sex-gadget-charger/

Give those out to teenage boys and power the whole world.

 

[rkm rdt]

Give those out to teenage boys and power the whole world.

You can see CRob's garage from space.

 

[Axis Dental Milling]

Lmfao that is great!!

 

[JohnWilson]

GC HT Zirconia, dialing it in. This is right out of the sintering oven

 

[RileyS]

Jensen xt
From the oven. Shade A2

And another BL3. The connector popped off the central. Boo.

They both have a lot more incisal color than the phone camera shows.

 

[tomas]

nice shape and color . very good

 

[AdrianB]

Jensen xt
From the oven. Shade A2
View attachment 17867
And another BL3. The connector popped off the central. Boo.
View attachment 17868
They both have a lot more incisal color than the phone camera shows.

Riley, what furnace are you using? Also what scanner and mill? Thanks Adrian.

 

[AdrianB]

Nice one from today, aside from the Iphone Pics
View attachment 12730
View attachment 12731
View attachment 12732
View attachment 12730 View attachment 12731 View attachment 12732

John what zirconia material are you using. Did you cut back? if you did what porcelain All done with your Mini? What sintering furnace? Thanks. Adrian. They look nice.

 

[AdrianB]

I really don't think I can compete with John's but here is a 2Connect Bruxzir FCZ Brigde.

View attachment 12919
View attachment 12920
View attachment 12921
View attachment 12922
View attachment 12919 View attachment 12920 View attachment 12921 View attachment 12922

Did you mill it with a 4 or 5 axes mill. Metal interface? Looks nice . Adrian.

 

[AdrianB]

Another one from today
View attachment 12948
View attachment 12949
View attachment 12948 View attachment 12949

John what is the white stone. Adrian.

 

[AdrianB]

Bruxzir Crown..

View attachment 13002 View attachment 13003

This is what i done yesterday...
Bruxzir crown..
View attachment 13002 View attachment 13003

Did you use a shaded block or white? Adrian.

 

[JohnWilson]

100% solid zenostar no glass

Sent from my iPhone using Tapatalk

 

[dmonwaxa]

Awesome looking John!

 

[rkm rdt]

nice and clean John,

and great photography!...you're really getting the hang of that cell phone

 

[NicelyMKV]

Awesome work, John!

 

[RileyS]

You've earned your weekend! Nice!

 

[charles007]

Very nice John !..... nice coloring and great staining ! Or is it Great coloring with very little staining needed when you glazed ? or combo of both ?
Please share, I promise to not tell anyone your trade secrets

Now I must critique your case so I can earn more Likes ! lol

I like the way you colored the centrals a little lighter and the lateral-cuspids slightly darker. This gives a more natural look unlike the typical crown look that can be spotted across the room.
Contours on cuspids are very nice and are the hardest single tooth to make natural looking..
Line angles are very natural looking unlike crown looking shapes we see so often in pfms shapes....
Interprox staining looks very natural and not overly stained.

Ok John, lets get real, you said no glass.... the enamel shading is so natural looking I got to know what brand of stains your using. I don't see any streaks or appearance of staining.
Are you that good with your Zeno coloring liquids, or bad photography that hides the stains and looks GREAT on my 32" LED screen
The only thing I would have added in the staining, a hint of dentin stain on the centrals/ incisal edge, unless female patient who insists on zero staining, and slightly more chroma on cuspids around gin 1/3 to 1/2.

John, your awarded 5 stars from me, and an award wining post.....
Thanks for posting....

 

[Car 54]

Very impressed, nice work, John