Cementing Ti base to zirconia

[rlhhds]

Can't recall what is recommended to cement a Ti base to zirconia? Thanks

 

[ZsoltM]

I use Multilink Implant from Ivoclar

 

[rlhhds]

I use Multilink Implant from Ivoclar

Thanks

 

[OzTech]

I use Multilink Implant from Ivoclar

What he said!!

 

[JohnWilson]

We switched to GC and the stuff is so amazingly tenacious.

We have run TEST units up in the oven and we can not get the stuff to burn out and loosen. It surprises the hell out of me.

 

[Tooth Geek]

Trying out some of ivoclar's new Multilink Hybrid Abutment HO (self cure). We've been previously using there multilink implant (light cure). So far sweet as.

 

[DMC]

Regular C&B Cement.

I use 3M ESPE Rely-X in Yellow Cap, not the Pink cap.

Seems to be working?

 

[ZsoltM]

We switched to GC and the stuff is so amazingly tenacious.

We have run TEST units up in the oven and we can not get the stuff to burn out and loosen. It surprises the hell out of me.

John, what is the name of the GC stuff you use, if I may ask

 

[doug]

What? Cyanoacrylate isn't acceptable?

 

[Nowakdental]

John is using the FujiCem Automix II.

 

[ZsoltM]

John is using the FujiCem Automix II.

Thank you!

 

[ParkwayDental]

We use to use Rely X and had some debonding that occurred. We then switched to Ivoclar Multilink HO light cured cemet. We have had excellent results with it.

There have been two times the Doc sent a screw retained crown back and we tried to run it up in the porcelain furnace to burn off the cement to separate them and we could never get them separated. And we ran it up hot as all get out.

 

[dimtsic]

Try panavia f 2.0 amazing stuff tested it by leaving a hybrid in the oven at 1000 celcius fot 15 minutes and nothing!

 

[cadfan]

Panavia F 2 opak with gc metal primer longest tested material for these cases multilink has a little bit better physical values but some guys have problems with decementation.

 

[ts4341]

Add Z-PRIME to your Zr before applying Panavia or Multilink.. Creates a even better bond with Zr