FrontHunter
Member
Full Member
- Messages
- 52
- Reaction score
- 6
I have about 6 of these ovens in storage if you need to pirate some parts off of a couple donors just let me know.
John is this still true?
I have about 6 of these ovens in storage if you need to pirate some parts off of a couple donors just let me know.
Jedi John has gone over to the dark side, you might find him on FB.John is this still true?
What is exactly is it doing? Is the motor turning but not lifting the table?
WhipMix won't sell the part to fix???The table lowers, but does not raise up. Can crank up manually inside the back.
If its clicking on the upward cycle and not moving. Take off the back panel. The little roll balls may be gummed up , need cleaning and re oil. You will have to manually raise and lower the table to access all the areas. I just had to do this to my 17 year old Pro 100. Your symptoms sound the same as mine did.
WhipMix won't sell the part to fix???
Nope, Judy Garland. She’s a Wiz at this stuff. They’re in Kansas.I like Garland Dental in the DFW area too - I think that's who you are referring to?
LCM