For Sale Selling all my equipment full service lab- Mills, Scanners, Ivobase, EVERYTHING

[smileguy49]

I hope the OP is ok. It's unusual to post everything for sale and then not come back to see if anyone is interested. So far that's exactly what's happened.

Sorry everyone, Yes I am ok (for the most part). I have had to close my doors after 22 years in the business and it has taken an emotional toll on me and my family for sure. I have been busy clearing out my leased space and trying to figure out how the heck I am going to support my family after this! I posted all my equipment for sell, but wasn't getting any notifications of messages. I will be logging on to make sure I see any new messages. Please let me know if you are interested in anything. Thank you

 

[smileguy49]

I’m interested to pm5 and 3shape e4 how much

Pm me if still interested

 

[Affinity]

Are you staying in the business? If you want to make the move from 6B to 7B I could give you a job.

 

[smileguy49]

Thank you, but no, I am out. 22 years was a good ride but now on to new things. Thanks

 

[hhahn]

Hi @smileguy49
I'm opening a lab and am in the process of contacting suppliers for quotes.
Do you have anything available from the original post?

 

[Affinity]

Hi @smileguy49
I'm opening a lab and am in the process of contacting suppliers for quotes.
Do you have anything available from the original post?

Where are you located?

 

[Inna-Hurry]

Location please?

 

[smileguy49]

Outside of Boise, ID

 

[smileguy49]

Well, most of the big stuff is finally gone. I do have a few suction units left, some hand pieces, denture processing stuff, denture teeth, burs, and supplies.

 

[hausofsmile1]

What kind of processing stuff and what brand of teeth.

 

[RileyS]

What are you doing with your life now?

 

[smileguy49]

What are you doing with your life now?

Enjoying not dealing with annoying dentists
Actually I have a home remodeling and repair business that is keeping me very busy now.

 

[Paul Springs]

Enjoying not dealing with annoying dentists
Actually I have a home remodeling and repair business that is keeping me very busy now.

As an annoying dentist, I annoyingly find that to be hurtful. I'll annoy you about that later.

Jk. Congrats. The only thing worse than dealing with patients is dealing with dentists...

 

[smileguy49]

As an annoying dentist, I annoyingly find that to be hurtful. I'll annoy you about that later.

Jk. Congrats. The only thing worse than dealing with patients is dealing with dentists...

Ha! I survived the lab for 22 years, but if I had to deal with patients I wouldn’t have survived 22 minutes!
It has been 5 months now and I am very much enjoying my new business, but in truth I do miss the lab sometimes (even the annoying dentists).

 

[Virtuoso]

The time has come for me to retire from dentistry and sell my equipment. I have had a full service lab, so I have everything for fixed and removable. I have 3 different mills, Roland DWX-50, Roland DWX-52DCI, and an Ivoclar PM5. The 50 has been stored for the last 2 years ready as a backup. It ran fine when shelved. The 52 and the PM5 were used last week and still run perfect.
Also selling...
-Ivobase system
-Hydrocoloid Duplication Machine
- E1 3Shape Scanner with computer
- E4 3Shape Scanner with computer (Just paid complete restorative with second seat May 1st)
- Novux sintering furnace
-Zubler Vario Press 300
-Pro Press 200
-Renfert vac mixer
-Zubler Easy-cast

Too much to list. I have anything needed for a lab. Will sell separate, or as a big lot. Have supplies as well. Message me if interested. I am located in Boise, Idaho. I am willing to ship the small stuff, and can help arrange shipping for the larger items. Also am willing to deliver within a 10 hour drive for the right price. Let me know if there is something specific you are looking for.

Do you have an Exocad software you are selling?

 

[smileguy49]

Do you have an Exocad software you are selling?

Nope, I was a 3shape guy. All my big stuff is sold. Now I just have supplies to sell

 

[Pancho Villa]

The time has come for me to retire from dentistry and sell my equipment. I have had a full service lab, so I have everything for fixed and removable. I have 3 different mills, Roland DWX-50, Roland DWX-52DCI, and an Ivoclar PM5. The 50 has been stored for the last 2 years ready as a backup. It ran fine when shelved. The 52 and the PM5 were used last week and still run perfect.
Also selling...
-Ivobase system
-Hydrocoloid Duplication Machine
- E1 3Shape Scanner with computer
- E4 3Shape Scanner with computer (Just paid complete restorative with second seat May 1st)
- Novux sintering furnace
-Zubler Vario Press 300
-Pro Press 200
-Renfert vac mixer
-Zubler Easy-cast

Too much to list. I have anything needed for a lab. Will sell separate, or as a big lot. Have supplies as well. Message me if interested. I am located in Boise, Idaho. I am willing to ship the small stuff, and can help arrange shipping for the larger items. Also am willing to deliver within a 10 hour drive for the right price. Let me know if there is something specific you are looking for.

Do you still have the Easy Cast available?

 

[smileguy49]

Do you still have the Easy Cast available?

Yes I do. Private message me for details

 

[Nikident]

hey do you have any old articulators left for a new grad dentist ? thanks

 

[smileguy49]

I don’t have any more full size articulators. I do have a lot of chrome (clap-clap) articulators.