Kreyer
New Member
- Messages
- 169
- Reaction score
- 3
Where did you get the idea this was a clinic at 6000 a set? I too believe you can get high quality with high production but lets not forget all of the other bs that can screw with an in house techs day relines, repairs, resets etc. . I believe if you want high quality over a long period of time you need to have the right staff and you surely don't want them burned out in 2 years. My advise is to set yourself up with someone with great potential and fine tune them into becoming a great tech. Give them the support and training it will require to get there, and give them the techs to give support with relines repairs investing processing articulating or whatever else. I would like to see any of these guys produce five top notce dentures a day with relines, repairs and all of the other steps bites, trays, and so on. If you truly want this to work then set your lab up for success not to fall apart 2 years down the road.
Hydent
Who said one technician in the laboratory??
for 5 units of rem per day you need 2 Dt's
If you are doing extensive repairs/relines 3 Dt's
If a Dt is seeing patients chairside...4 Dt's
10 per day requires 5 Dt's Definitely...plus one for chairside work..
Rob