Experiences with Ceramill Mall AmannGirrbach

[imagedental11]

we have the knut miller lib, not worth the oney make your own if you have the time and the know-how

 

[adamb4321]

What price is the 450i Bob?

 

[k2 Ceramic Studio]

we have the knut miller lib, not worth the oney make your own if you have the time and the know-how

What format is it saved in, any chance you could do a dropbox link to it? Even if its not in .stl there will be someone who can convert it, cough cough Scott.

 

[DentalAxess]

Hi Bob this system in completely open, most mfg Co's offer the Amann Shaped zirc from talladium to dirket, you can accept stl files from other systems to mill, and there is a handfull of tool companies that have the ceramill tools, we have two systems and they are great! View attachment 5847

Completely open?
Could you tell me how to modify the CAM strategies to suit other materials?
Could you tell me how to change the CAM tolerances in order to support third party implant components?

You may find out the system is not as open as you think...

 

[French Cadman]

we have the knut miller lib, not worth the oney make your own if you have the time and the know-how

Hi my friend !

If you can send me the premolars and molars upper and lower stl files (large size ) , I can make the EOFF files for all exocad Users on DLN !

You can make 8 crowns up and 8 crowns low, right or left side , I'll manage for pontics ....

Only if you're OK ...

All the best !

Thanks !

FCM

 

[French Cadman]

What format is it saved in, any chance you could do a dropbox link to it? Even if its not in .stl there will be someone who can convert it, cough cough Scott.

drmsdfa file Peter whith special dongle !

The best solution, create a stl file and then convert it in eoff file ...

What do you think?

 

[lcmlabforum]

I think it has it's place, esp. if you have a long term tx plan.
Example, if you are remaking a denture, then placing implants and
need conversion to a hybrid. If you have an electronic memory of
which teeth goes well, you can recreate a surgical guide,
you can design the implant placment to be idealized for a hybrid
and then even possibly recreate the same hybrid in about 5-10 years
when the denture teeth needs to be 'retoothed'.
I won't count on an intraoral scanner for impression for full denture,
but the prosthetic end has it's needs that can be addressed with
a digital solution.
LCM

 

[afelab2013]

Provisional filing pre PMMA multi layer made with Ceramill cad cad cam and milled with 2 Motion wet and relined in the mouth with the same monomer and polymer material!!

 

[afelab2013]

Provisional filing pre PMMA multi layer made with Ceramill cad cad cam and milled with 2 Motion wet and relined in the mouth with the same monomer and polymer material!!