S
sensei
Member
Full Member
- Messages
- 50
- Reaction score
- 3
Lately we have been having some of our denture cases not divest cleanly on the intaglio. The stone seems to be almost incorporated into the acrylic. Has anybody had this issue? Here is our procedure.
Remove softened wax.
Pour boil out solution over the model.
Scrub with toothbrush under running water.
Dry model.
Paint Diamond D separator with a brush on model.
Allow to dry.
Pack using Nature-cryl MC acrylic.
Allow to bench set 20-30 minutes.
Microwave cure.
Bench cool 1 hour.
Water cool 1 hour or bench cool overnight.
Deflask.
The waxup side is usually reasonably clean, but the tissue side is a mess.
Any ideas on what we are doing wrong or things we can change?
Thanks
Remove softened wax.
Pour boil out solution over the model.
Scrub with toothbrush under running water.
Dry model.
Paint Diamond D separator with a brush on model.
Allow to dry.
Pack using Nature-cryl MC acrylic.
Allow to bench set 20-30 minutes.
Microwave cure.
Bench cool 1 hour.
Water cool 1 hour or bench cool overnight.
Deflask.
The waxup side is usually reasonably clean, but the tissue side is a mess.
Any ideas on what we are doing wrong or things we can change?
Thanks