E
erykd1
Active Member
Full Member
- Messages
- 120
- Reaction score
- 12
On the front of the printer you can test the LCD in the configuration settings. With no resin in the vat, there are some patterns you can project to see if it's working properly. Also, make sure your Z axis build plate is adjusted properly against the LCD. Any other ideas @zero_zero?I'm wondering if my LCD screen is bad. I tried it again using the new resin and there still isn't anything building on my build plate. I used chitubox to slice it and used the new resin profile and still nothing. I know that the UV light is working, I can see it coming on when it's supposed to and turning off as well.