prestige.dental
Active Member
Full Member
- Messages
- 270
- Reaction score
- 15
Same file of hybrid denture milled in wax and then PMMA on Rolland DWX 50.
The 2-connect female cone fits flush on wax and sticks out 1/4 mm out on PMMA
CAP said do the PMMA on imes 450, little better but still sticking out.
Can somebody please help. Because of this the temporary hybrid denture is not fitting passively . And u can't test try the PMMA hybrid for the future zirconium hybrid.
Pl suggest what should I do that the fitting in PMMA is as good as wax.
Last edited: