![zero_zero](/forums/data/avatars/m/9/9932.jpg?1673666213)
zero_zero
Well-Known Member
Full Member
- Messages
- 6,305
- Reaction score
- 1,397
Sum3d is using a licensed third party library for the 5 axis calculations...
The last strategies I ran were a 5 axis utilizing a 2mm, 1mm and .6mm. I do not have exact specs at the moment, but I was running the 3+ghz AMD 8 core with 32gigs of ram and a Radeon 7970 card.
Not the phenom CPU but the newer pile driver
Sum3d is using a licensed third party library for the 5 axis calculations...
Grab a hex-viewer and look into the code...check who's the author ( everybody pretty much copyrights their own workWhere'd you hear that?
Mike, never heard anyone complain about overkill in the computer worldif that's the case it should be blazing fast then
![]()
Grab a hex-viewer and look into the code...check who's the author ( everybody pretty much copyrights their own work)...that is not Sum3D development...same is true for the simulation module and some other stuff too....quite a few CAM software out there share the very same library set BTW...
![]()
SUM3D installs as 32-Bit - there are components that can utilize 64-bit that can run as well but only when activated - So this would mean that they would need to be in test mode and have that feature turned on to utilize it. All Updates are the same - will work with 32-bit or 64-bit Operating Systems.First check the windows version the processor version the sum3d version and the update version.
and see if they are all compatible (64 bit or 32 bit).
i don't have sum3d but i got a real problems when the version of the software is different of windows
that is specially true when the software is a 3d software.
if the software version is 64 bit, and the windows version is 32 bit then the program will usually refuse to install or if installed may not work at all (as i said before specially the 3d software).
old versions are mostly 32 bit and they should work fine with older computers.
If you find all the software including windows and the processor are compatible then you might consider to contact sum3d directly and ask for support they should have the best answer for your problem of the version of your software.
best wishes
would you like to test another CAM software on your same hardware ?
Hi Cadfan, seems you don't like the picts on our website. Indeed, we strive to make the best CAM software and spend less time trying to convince by pictures, we prefer to proove by real machining.
Tell me if you want to test another CAM software, this way you can know wehter the problem is Hard or soft.So I recently got the updated 2014 version of SUM3D, I'm not loving it as much as the older version I had before. It is taking a really long time to process a job. I thought it might be my pc, so I went out and bought a new one(needed to anyway old one was a Intel Duo with 2G of Ram) now I have the AMD A8 with 8G of Ram. Why is this taking so long to process a job? Anybody else experiencing this problem?