How to mill this?

[STJDENT]

Does anyone know how I can mill this?
Our smallest cutter 0.5mm is to big.
Diameter of this party is about 0.14 mm.

Thnx

 

[French Cadman]

Not much success here ....

Nobody mill ?

 

[eyeloveteeth]

well the short answer would be to find a tool that could cut less than 0.5mm right? also a different shaped bur, small lollipop?

 

[KentPWalton]

What is it that you're trying to mill? Is it not polish-able where the fillet is left?

 

[CoolHandLuke]

like this. unless you create your case on an actual lathe this is as good as u can get

 

[REJ]

You could replace the geometry with a radius compensation at the point where it is too tight, obviously custom and smaller tooling is going to make this easier as well.

 

[French Cadman]

Find the right tool or select the right file ........................ on the right system !

 

[CoolHandLuke]

yes, ovemilling is an option.

but i wouldn't.

 

[French Cadman]

Why CHL ?

It's not the width of the groove which is decisive, this is the octagon !

No ?

 

[CoolHandLuke]

its much easier to make this cut with an industrial Lathe. milling will remove so much material the fit will be too loose for me.

 

[French Cadman]

OK guy !

Remember that the original abutment by Straumann doesn't cover the groove ...

 

[French Cadman]

I like this thread ! one more with 0.5 tool , 2000 parts made with this file and no dead !

 

[zero_zero]

Nice demo Frenchy ...although I wouldn't destroy that analog to prove my point to nonbelievers...

 

[AltreX]

...it covers....

 

[AltreX]

Thats why it is hard to find someone to mill synocta suprastructures.
Even Nobel and Atlantis make some crap with them...

 

[cadfan]

I like this thread ! one more with 0.5 tool , 2000 parts made with this file and no dead !

looks like white Grand Cru

 

[Torquadon]

OK guy !

Remember that the original abutment by Straumann doesn't cover the groove ...

Well you placed 2 different implants here, one is Strauman RN (tissue level) on which premade abutments do not cover the groove if you are doing cement retained restoration, but plastic sleeve which is used to wax up crown does, it is covered by abutment if you are doing screw retained crown tough. Second implant is Straumann RC (bone level) in which case you do not cover the groove, as it is not there.

Also I believe that with parts which are to fit on pointy preps or implants it will always be overmilling, smaller the bur, smaller overmilling but still. Basicly to do it without overmilling your bur needs to be smaller than the groove you want to cut

 

[Beatrice]

And ppl still argue with me that their machine can do the same as mine ;p
If ever you are tired to play around, I can do it for you.

 

[Torquadon]

And ppl still argue with me that their machine can do the same as mine ;p
If ever you are tired to play around, I can do it for you.

You ask for help with milling in house and there is always at least one advert of milling company in return

 

[cadfan]

And ppl still argue with me that their machine can do the same as mine ;p
If ever you are tired to play around, I can do it for you.

Just a joke !! in the past no scanner can do this cases like yours !? now 3 shape excepted ! maybe in the future we learn you mill it on DWX 50 ?!