olwyn
Member
Full Member
- Messages
- 38
- Reaction score
- 3
Hi can anyone please explain the Error Code 1700 for the EP3000. It is not shown in the book.
Sorry if this has been asked before!
Sorry if this has been asked before!
Terry Whitty
Well-Known Member
Full Member
- Messages
- 559
- Reaction score
- 136
SERVICE REMINDER
Two years have passed or the heating muffle has been in use for more than 1200 firing hours since the last inspection of the furnace. Ivoclar Vivadent therefore recommends that your furnace should be inspected. Please refer to the Equipment Service Passport or the Operating Instructions for further information. The interval until the next appearance of the note can be set in the Settings.
Thats the manual verbatim
Two years have passed or the heating muffle has been in use for more than 1200 firing hours since the last inspection of the furnace. Ivoclar Vivadent therefore recommends that your furnace should be inspected. Please refer to the Equipment Service Passport or the Operating Instructions for further information. The interval until the next appearance of the note can be set in the Settings.
Thats the manual verbatim
ps2thtec
Well-Known Member
Donator
Full Member
- Messages
- 2,496
- Reaction score
- 620
"If it ain't broke don't fix it". So basically if everything is fine and your calibrations are good
and your pressings are good then stay the course. Like Terry says, Service Reminder.
and your pressings are good then stay the course. Like Terry says, Service Reminder.
olwyn
Member
Full Member
- Messages
- 38
- Reaction score
- 3
Thankyou both. Not sure why I couldn't find that info...certainly looked hard!
