• Welcome to Dental Lab Network
    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

    Customized Stone Model Formers? Where to buy?

    Discussion in 'Equipment' started by BlakeHarting, Jan 11, 2017.

    1. BlakeHarting
      Curious

      BlakeHarting Member Full Member

      Joined:
      Feb 2012
      Messages:
      111
      Likes Received:
      21
      HELLO, once again I have a question for the dental lab hive mind that is DLN:

      Where do I get customized model base formers?? You know, the full arch ones and the quadrant ones you pour stone into...

      Thank you in advance for your wisdoms.
       
    2. 2thm8kr
      Devilish

      2thm8kr Beanosavedmysociallife Full Member

      Joined:
      Dec 2009
      Messages:
      7,323
      Likes Received:
      1,796
      http://www.tddentalsupply.com/product/model-former/
       
      • Like Like x 1
    3. JKraver
      Tired

      JKraver Well-Known Member Full Member

      Joined:
      Jun 2015
      Messages:
      2,210
      Likes Received:
      358
      Do you mean custom with your name on it?
       
      • Like Like x 1
    4. CatamountRob
      Dead

      CatamountRob Banned Member Full Member

      Joined:
      Feb 2009
      Messages:
      4,120
      Likes Received:
      1,007
      Can I get them with my likeness emblazoned on them? Maybe in such a way that the models come out with my smiling face embossed in them? Where's Ron?!?
       
      • Funny Funny x 1
    5. zero_zero
      Drunk

      zero_zero Well-Known Member Full Member

      Joined:
      Mar 2013
      Messages:
      3,403
      Likes Received:
      907
      I've made one just for the fun of it out of duplicating silicone...alas it didn't last too long. Cut our logo out of wax on the mill, placed it on the bottom of a base former, then filled it with plaster...finally made a mold of it with silicone...easy...
       
    6. BlakeHarting
      Curious

      BlakeHarting Member Full Member

      Joined:
      Feb 2012
      Messages:
      111
      Likes Received:
      21
      Haha. YES, I would like to put a picture of my pet Sugar Glider playing electric guitar on the bottom of every model.

      BTW I do not have a pet sugar glider :(
       
      • Funny Funny x 1
    7. BlakeHarting
      Curious

      BlakeHarting Member Full Member

      Joined:
      Feb 2012
      Messages:
      111
      Likes Received:
      21
    8. rc75
      Breezy

      rc75 Well-Known Member Sponsors Full Member

      Joined:
      Oct 2011
      Messages:
      2,374
      Likes Received:
      475
      I just came back from lunch and seen this. What's your number so can ask you a few questions. We do offer these.
       
    9. PDLtd

      PDLtd New Member Full Member

      Joined:
      Dec 2016
      Messages:
      27
      Likes Received:
      5
      Awesome idea, I like it, but it is limited by the fragility of the material. Take it a step further. Cast an impression in the silicon mould that has your logo. Then do a mouth guard suck down over the cast. If logo doesn't come out due to deep depression in cast, melt some excess blank material into the voids and keep heated before sucking down. I've made a few with suckdown blanks, and they work well, but never thought of including logo or a name.

      Cheers


      Sent from my iPhone using Tapatalk
       
    10. rkm rdt
      Artistic

      rkm rdt Well-Known Member Donator Full Member

      Joined:
      Nov 2007
      Messages:
      11,879
      Likes Received:
      2,167
      [​IMG]
       
      • Creative Creative x 1

    Share This Page