Axis Dental Milling
Active Member
Full Member
- Messages
- 192
- Reaction score
- 32
Honestly never really used it, once I found the Multilink cement I stuck with it. I like it because it is a dual cure cement.
I am gonna order Ivoclar multilnk implant cement.
What do you think about panavia
Does this happen with the same doctor only?same thing happened again
And this happens every time when the dentist is trying the bridge in the mouth and the shear force of tight contacts is able to slough them off.This never happens on nt trading ti bases using the same cement , same protocol and even against tighter prox contacts.
Does this happen with the same doctor only?
same thing happened again
And this happens every time when the dentist is trying the bridge in the mouth and the shear force of tight contacts is able to slough them off.This never happens on nt trading ti bases using the same cement , same protocol and even against tighter prox contacts.[/QUOT
Thanks John, your posts very educational with real substance. I really respect that. By the way this bridge was done with trios impression by dentist using scan body in the mouth.There is ZERO wrong with the concept of 2 connect, its not for EVERY case and you have to use sound principals when you choose to use it.
Its absolutely **** on Narrow fixtures but for standard stuff it works AWESOME, I have a bunch of full arch cases with this system with very few issues but I am super anal about how we use them and how we go about our cementation. I use a resin cement and its a bitch to separate
Another very important point is that even for a small span bridge you start with a verified model, If you are not making a jig for every case you are going to run into this as well. Only way I don't make a mock and go straight to finish is a SHORT SPAN bridge is presented with an open tray imp with luted resin transfers inside an impregum impression. Anything else gets milled in plastic and a verification jig is sent.
That ain't all our friends at Straumann are up to,....a little bird told me that an arsenal of naked machines are being produced for them by a certain company with a funny name to be inserted into their shiny new Straumann style enclosures. This can't possibly be good can it? Oh Crap!!!
John
Is it true that the two connect design" cone in cone " can compensate for some discripency in implant impression ie not using the verified model by jig
Thanks John, your posts very educational with real substance. I really respect that. By the way this bridge was done with trios impression by dentist using scan body in the mouth.
Will u call 3.5 zimmer a narrow fixture for 2 connect.