prestige.dental
Active Member
Full Member
- Messages
- 270
- Reaction score
- 15
I don't know what is happening or what we are doing wrong with the 2 connect female metallic copings, they keep debonding when the dentist is tightening the two connect bridge onto the implants in the mouth.
We are using relyx ultimate resin cement
Micro abrade the zirconium
Micro abrade the female
Apply adhesive to the zirconium and female
Wait 30 sec
Place relyx resin cement into the zirconium and onto the female 2 connect and glue them together
And light cure
But this debonding never happens on the single crown 2 connect ti bases. We use the same cement and same bonding protocol.
Pl help.
Sam
We are using relyx ultimate resin cement
Micro abrade the zirconium
Micro abrade the female
Apply adhesive to the zirconium and female
Wait 30 sec
Place relyx resin cement into the zirconium and onto the female 2 connect and glue them together
And light cure
But this debonding never happens on the single crown 2 connect ti bases. We use the same cement and same bonding protocol.
Pl help.
Sam
Attachments
Last edited: