implant screwdriver kit

[mcfly]

Where is the best place for good value screwdriver kit for most systems?
I know smileline has a fantastic one but its way to expensive!

 

[rkm rdt]

Have you tried the Nobel uingrip?

It works on most screws.

 

[Marcusthegladiator CDT]

I have the smile line kit and its driver station(the Block...)

in your face!

 

[rlhhds]

Try Diamodent, I got my set of drives there. You can order just the drives you need and a holder. $30.00 each

 

[rkm rdt]

Have you tried the Nobel uingrip?

It works on most screws.

 

[rlhhds]

I have used that also. It works until an overzealous tech strips the original hex out of the screw:Cry:

 

[k2 Ceramic Studio]

MedentiKa does a fantastic one, I think it has 6 different drivers in it that fit every system I have ever come across and the driver handle has a torque spring in it stopping you from damaging the heads plus it has a surgery torque wrench in it. We lend it out to our surgeons every now and then when they ring up with an adopted case and no driver to remove it. (lost count of the bottles of dark rum that bad boy has got me )

http://www.mpdental.lt/uploads/shop/docs/8_8fa35aeefc682e8e07f47203d5915f52.pdf

(page 123) All the best Pete

 

[CRWNMKR]

the lab driver kit from diamodent is excellent

 

[dmonwaxa]

DITTO (rlhhds and CRWNMKR)

 

[Tayebdental]

Have you tried making your own implant screw drivers?? I do.

 

[doug]

You can go to Lowe's and get the .050 torque tip driver, or Harbor Freight. cheap

 

[Bumfrey]

3i's driver fits most screws.

 

[disturbed]

imo using a driver that kinda fits is a BAD idea. drivers should fit snug with no play.

 

[grantoz]

go the smile line kit and then tell all the other techs that it electrified otherwise all your drivers disappear it drive me nuts.i could turn into DEXTER any minute

 

[pjd cdt]

http://www.osseoustech.net/store/index.php?target=categories&category_id=184#LAB

I was going to try this one. Anybody try these ?

Pete


Sent from my iPad using Tapatalk

 

[kcdt]

http://www.osseoustech.net/store/index.php?target=categories&category_id=184#LAB

I was going to try this one. Anybody try these ?

Pete


Sent from my iPad using Tapatalk

Yes! They are terrific. Great bang for the buck, the short lab use set is less than $200. They fit 99% of the platforms most commonly used in the US.
This was the set we acquired after searching to get our tools back in order.
They are a great choice.

 

[kcdt]

iTools Dental set of 7. $200

Went there, not seeing any driver sets below $650.

 

[lcmlabforum]

I think the one for Osseous Tech look remarkably like the one from Preat corp . . .
I have the DiamonDent one. They do not have the 0.90mm or 0.35" hex driver
unlike the Osseous Tech picture here . . . holder carries 6 lab drivers but
you can wall mount them.
LCM

 

[pjd cdt]

I think the one for Osseous Tech look remarkably like the one from Preat corp . . .
I have the DiamonDent one. They do not have the 0.90mm or 0.35" hex driver
unlike the Osseous Tech picture here . . . holder carries 6 lab drivers but
you can wall mount them.
LCM

Here's how mine came

 

[lcmlabforum]

Thanks. This is the one from Preat
http://www.preat.com/implant_tools.htm
They have long and short version - looks very similar to Osseous Tech one, huh?
I do like the long handle from Preat and easier to twist with the
back against palm of my hand.
LCM