NicelyMKV
Well-Known Member
Full Member
- Messages
- 3,557
- Reaction score
- 262
The warm up program is critical. It's on the first screen about three down from the top selection. It says "run warm up program". You have to do this everyday before your first press. I also set my idle temp to 700c to keep my oven at the appropriate temps to help if I had a long period in between pressing on a particular day.
You will see an immediate difference in your pressings. You may need to lower your high temp if you changed it? The warm up program will most likely take care of the inaccuracies you were seeing?
One of the Zubler guys could explain the reasons better than me, but I know it worked for me, and the oven was designed that way
If you never make a decision then your possibilities are endless.
You will see an immediate difference in your pressings. You may need to lower your high temp if you changed it? The warm up program will most likely take care of the inaccuracies you were seeing?
One of the Zubler guys could explain the reasons better than me, but I know it worked for me, and the oven was designed that way
If you never make a decision then your possibilities are endless.