harmonylab
Active Member
Full Member
- Messages
- 383
- Reaction score
- 10
Our origin should be arriving any day now, and we'd like to sell our current Sirona system.
Don't bother with this system if most of your docs give bad preps, or if you're anal about air tight margins.
If you have need to quickly pump out lots of emax crowns for a reasonable cost, this will work for you.
Otherwise, you really should look into other systems.
This is the Sirona Inlab system with a second Cerec MCXL mill.
Sirona Inlab MCXL with manual chuck (4 years old)
Sirona Cerec MCXL (under 2 years of use)
Blue cam with PC
cerec unlimited dongle
inlab dongle (lots)
lots of zirconia & emax blocks
kits, accessories
PC is running Inlab 3.88 and Cerec 3.85
Everything is in excellent condition, and you're welcome to come check them out if you're in the area.
39k
Don't bother with this system if most of your docs give bad preps, or if you're anal about air tight margins.
If you have need to quickly pump out lots of emax crowns for a reasonable cost, this will work for you.
Otherwise, you really should look into other systems.
This is the Sirona Inlab system with a second Cerec MCXL mill.
Sirona Inlab MCXL with manual chuck (4 years old)
Sirona Cerec MCXL (under 2 years of use)
Blue cam with PC
cerec unlimited dongle
inlab dongle (lots)
lots of zirconia & emax blocks
kits, accessories
PC is running Inlab 3.88 and Cerec 3.85
Everything is in excellent condition, and you're welcome to come check them out if you're in the area.
39k