O
Optix1
Member
Full Member
- Messages
- 8
- Reaction score
- 0
is there a posibitity to convert from stl to 3ox or dcm ??
3ox is just a zip container...
I just have to know why you would want to go from open format to closed proprietary format?
Somethings not right there. Have you contacted your reseller for help?i need to add the confert the stl to dcm because i cant import it to the 3shape system it gaves me all the time error wit singele crones and implants and it doesnt work =( and i need to design it as quick as posible have no other system to work with only 3shape =/
Even if you import the stl into 3shape it will convert it to dcm, and then take that dcm file and import it. But no matter what you do it still knows that converted file is from a stl and will still act as a stl file. Trust me I have tried multiple times and ways to get around it.i need to add the confert the stl to dcm because i cant import it to the 3shape system it gaves me all the time error wit singele crones and implants and it doesnt work =( and i need to design it as quick as posible have no other system to work with only 3shape =/
Only converts to stl not the other way around.CrossManager DATAKIT