Cold cure techniques for relines, RPDs, and night guards

  • Thread starter Thread starter Denturist
  • Start date Start date
Denturist

Denturist

Active Member
Full Member
Messages
381
Reaction score
30
Cold cure techniques for relines, RPDs, and night guards, and FLIPPERS

This is a technique I have used for quite a while, actually many years, with good results.
Perhaps some of you can also use it with success.
The process works well with relines, most PDs, night gaurds, and ... dare I say it.... flippers. OH MY GOD.
Well it appears the file is to big to download here..... so if your still curious email me and I will send it to you via email.
 
Last edited:
Denturist said:
This is a technique I have used for quite a while, actually many years, with good results.
Perhaps some of you can also use it with success.
Well it appears the file is to big to download here..... so if your still curious email me and I will send it to you via email.
Click to expand...


I'll take a copy.

Thanks,
michelle
 
Last edited by a moderator:
That would be more convenient, I will look into it.
Thanks'

Well that site is a pain in the ass...... won't be happening there........
 
Last edited:
Here William, I just uploaded it to my website for you. If you want it taken off, I'll do it no questions asked. Here's the link (it's a big file folks, take a bit to show up, just click the link and wait if your not on some mega speed internet).

http://www.patrioticthunder.com/halflaskprocessing.pdf
 
Thanks for sharing William and thank you Rob for posting.
I might try this for my next nightguard.
 
:DNo problem Rob..... Thank you for doing that.
 
Your welcome Robert.
Have you tried any of the candulor teeth? particularly the nano filled? if so how are they holding up? I hear there wear characteristics are supposed to be superior to all other resin teeth.
 
William,

Yes, I have been using the posterior Condyloform II for two years now and the Anteriors PhysioStar for about one year now. I use these composite denture teeth on implant retained and supported overdentures. For mucosal supported I use PMMA denture teeth. The Candulor teeth are PMMA in the cervical and composite in the occlusal or facial. They do have a very high resistance to wear.

Robert
 
Robert,

Didn't Ivoclar recently purchase Candulor? I am sure it will not be long before Ivoclar has the nano-filled teeth in their line-up. They had decent success with their Vivosit and Orthosit teeth, in the area of wear resistance, but the delamination hurt sales. These new teeth may be the best of both worlds!
 
A colleague and friend of mine in Mesa Az. told me that Heraeus also has a nano filled tooth that he had been using for years with excellent success. I believe they are the Mondial line with nano pearls?
 
Denturist said:
A colleague and friend of mine in Mesa Az. told me that Heraeus also has a nano filled tooth that he had been using for years with excellent success. I believe they are the Mondial line with nano pearls?
Click to expand...

There is a difference between Nano filled PMMA(Mondial) denture teeth and Nano Filled Composite (NFC) Denture teeth.
 
Great technique! Thanks for sharing.
 

Similar threads

LabRat23
DMG 3D PRINTED MODELS SEPRATOR?
Replies
8
Views
2K
tuyere
T
C
Printing night guards.. which system
Replies
7
Views
2K
sidesh0wb0b
sidesh0wb0b
T
Cold cure relines dentures
Replies
8
Views
4K
JKraver
JKraver
S
Current state and future of removables, my thoughts.
2
Replies
21
Views
5K
TomZ
TomZ
O
Cold Cure Salt & Pepper technique Versus Thermoformed Process
Replies
0
Views
2K
orthoace
O
Top Bottom