Marylandfarmer
Member
Full Member
- Messages
- 39
- Reaction score
- 4
We are new owners of a 3Shape system. We have a D2000 scanner with a Wieland hybrid select mill.
I have some experience with Sirona and Nobel. Starting with a Nobel Mod 40, then a Forte, and we have the newest Nobel scanner. I have designed a lot of titanium bars and custom abutments on Nobel and some C&B on Sirona. I have been through the basic training with Ivoclar/Wieland.
I have very little experience using 3Shape...
I am interested in making a hybrid zirconium/titanium screw retained prosthesis. Where do I start? I am interested in scanning the wax up over the finished frame. Designing a digital copy of the wax up that fits to the top of the frame. Then Mill this design out of PMMA, for a trial prosthesis, or zirconium for the final.
I know this should be possible, just not sure where to start. What 3 Shape module I need to use? I have done this type of thing on other systems for a crown or small bridge. I think they may have called it "Copy cad". When I choose to do this for a waxed up bridge it wants to scan all the dies. I only have one thing to scan for the bottom, the top of the bar.
Thanks for your expertise.
I have some experience with Sirona and Nobel. Starting with a Nobel Mod 40, then a Forte, and we have the newest Nobel scanner. I have designed a lot of titanium bars and custom abutments on Nobel and some C&B on Sirona. I have been through the basic training with Ivoclar/Wieland.
I have very little experience using 3Shape...
I am interested in making a hybrid zirconium/titanium screw retained prosthesis. Where do I start? I am interested in scanning the wax up over the finished frame. Designing a digital copy of the wax up that fits to the top of the frame. Then Mill this design out of PMMA, for a trial prosthesis, or zirconium for the final.
I know this should be possible, just not sure where to start. What 3 Shape module I need to use? I have done this type of thing on other systems for a crown or small bridge. I think they may have called it "Copy cad". When I choose to do this for a waxed up bridge it wants to scan all the dies. I only have one thing to scan for the bottom, the top of the bar.
Thanks for your expertise.