telascopc crown

[mst silva]

hi any one can helap me to make telascopic crown using exocad softwear

 

[mst silva]

i can make but i can't mill it ..i think some parameters are wrong...what is the most important parameters to change making telescopic crown..
exocad software and sum 3 d software Roland 5 axis cad cam matching

 

[cadfan]

i can make but i can't mill it ..i think some parameters are wrong...what is the most important parameters to change making telescopic crown..
exocad software and sum 3 d software Roland 5 axis cad cam matching

a telescope is still a coping with parallel walls so 2 insertion axis inside outside but nothing special only for strategie and nesting different but what is your problem.Is your problem that sum has no strategie in the automatic ????

 

[DMC]

Should work fine!

What cannot be milled from side 180 due to undercut, should be able to mill from side 0. (external surface)

Even in Three axis! Really, no 5-axis necessary....

Regular 3-axis + flip coping strategy should be fine.

You did not describe your problem very well...so I have no idea what to say?

 

[thondaki]

hi any one can helap me to make telascopic crown using exocad softwear

Yeah , Just tell us what exactly you are trying to figure out or what you want for your final product.

 

[mst silva]

Should work fine!

What cannot be milled from side 180 due to undercut, should be able to mill from side 0. (external surface)

Even in Three axis! Really, no 5-axis necessary....

Regular 3-axis + flip coping strategy should be fine.

You did not describe your problem very well...so I have no idea what to say?

thanks for reply to me..
i am new for this field i don't know what is the parameter to change to telescopic crown. can you tell me step by step main point of making telescopic crown ..

my served stl file cant mil by Sam 3d because fist time my bur is broken...second time i check tool path........ tool path is wrong all tool path not lord to sum 3 d software ......
only crown rough / trim connecters and radius connectors tool path only .
external rough/ internal rough/ external finishing/ internal finishing tool parth missing what can i do...please help...

 

[mst silva]

thanks for reply to me..
i am new for this field i don't know what is the parameter to change to telescopic crown. can you tell me step by step main point of making telescopic crown ..
my served stl file cant mil by Sam 3d because fist time my bur is broken...
second time i check tool path tool path is wrong all tool path not lord to sum 3 d software ......
only crown rough/trim connecters and radius connectors tool path only .
external rough/ internal rough/ external finishing/ internal finishing tool parth missing what can i do...please help...