look in the tools folder if 1B-wax is activated for wax internal undercut if not activate use federate , rpm and delivery from anther function for example finishing crown or so.
I believe that would be the tool name for a 2.0mm(for roughing). Not 100% since we use exocam and Match2 and when using exocam for milling on our roland our milling strategies are for 2.0mm/1.0mm/0.6mm and if milling in High Def can add the 0.3mm tool
look in the tools folder if 1B-wax is activated for wax internal undercut if not activate use federate , rpm and delivery from anther function for example finishing crown or so.