• Welcome to Dental Lab Network
    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

    Sintered Chrome

    Discussion in 'Metal' started by 2000markpeters, Feb 27, 2016.

    1. 2000markpeters

      2000markpeters Active Member Full Member

      Joined:
      Feb 2013
      Messages:
      142
      Likes Received:
      26
      Just milled and sintered my first few cases, half metal occlusals and a bunch of copings. Milled well with zirc burs and strategies. Occlusal is amazing as we can get detail with 0.5 bur. Much better detail than when I mill chrome. Sintering went without a hitch and they fit bang on. Used Whitepeaks CopraSintecK disc.
       
    2. 2thm8kr
      Devilish

      2thm8kr Beanosavedmysociallife Full Member

      Joined:
      Dec 2009
      Messages:
      7,882
      Likes Received:
      1,978
      Can you post pics of post sintering?
       
    3. Sevan P
      Twisted

      Sevan P Well-Known Member Full Member

      Joined:
      Jun 2012
      Messages:
      2,459
      Likes Received:
      510
      What oven? Don't you have a sintering oven with argon gas?
       
    4. 2000markpeters

      2000markpeters Active Member Full Member

      Joined:
      Feb 2013
      Messages:
      142
      Likes Received:
      26
      Argon must be used. 4 hour cycle.
       
    5. 2000markpeters

      2000markpeters Active Member Full Member

      Joined:
      Feb 2013
      Messages:
      142
      Likes Received:
      26
      How do i post pictures?
       
    6. Marcusthegladiator CDT
      Goofy

      Marcusthegladiator CDT Well-Known Member Full Member

      Joined:
      Mar 2012
      Messages:
      3,102
      Likes Received:
      441
      Very carefully.
       
      • Funny Funny x 1
      • Informative Informative x 1
    7. 2thm8kr
      Devilish

      2thm8kr Beanosavedmysociallife Full Member

      Joined:
      Dec 2009
      Messages:
      7,882
      Likes Received:
      1,978
      Upload a file at the bottom where you click post reply.
       
    8. 2000markpeters

      2000markpeters Active Member Full Member

      Joined:
      Feb 2013
      Messages:
      142
      Likes Received:
      26
    9. 2000markpeters

      2000markpeters Active Member Full Member

      Joined:
      Feb 2013
      Messages:
      142
      Likes Received:
      26
      Keep getting error message. Shows I have uploaded 100% but then error shows when I want to post
       
    10. 2thm8kr
      Devilish

      2thm8kr Beanosavedmysociallife Full Member

      Joined:
      Dec 2009
      Messages:
      7,882
      Likes Received:
      1,978
      There is a limit on file size for upload. Check that first.
       
    11. grantoz
      Amused

      grantoz Active Member Full Member

      Joined:
      Oct 2010
      Messages:
      890
      Likes Received:
      229
      There is an amazing full arch case on the zirkonZahn site .Its on implants individual milled crowns on over prepped bar pink resin for the gingiva .Its also been gold plated or some kind of deck gold like product its truly impressive and well worth a look if you are into sinter metal or not.
       
    12. Bumfrey
      Pensive

      Bumfrey Active Member Full Member

      Joined:
      Mar 2012
      Messages:
      438
      Likes Received:
      41
      BUMP!
      Very interested. Waiting for ADX16 in Sydney to look into it further. Loved the idea of it for the last few years. Too poor to do anything about it...
       
    13. NYJHL
      Twisted

      NYJHL New Member Full Member

      Joined:
      Sep 2016
      Messages:
      29
      Likes Received:
      3
      What grade of Argon are you using? H
      Have you ever experienced chalky/matte green units that did not shrink after being sintered?
       
    14. Techy
      Bored

      Techy Member Full Member

      Joined:
      Jul 2009
      Messages:
      157
      Likes Received:
      5
      Need a high medical grade argon (5.0) for best results,,,come out perfect silver/grey
       
    15. rookiee

      rookiee Member Full Member

      Joined:
      Oct 2013
      Messages:
      87
      Likes Received:
      7
      What's the production price comparing to SLM?
       
    16. liplip

      liplip New Member

      Joined:
      Feb 2016
      Messages:
      1
      Likes Received:
      0
      Or vacuum sinter oven. No playing with gas.
       

    Share This Page