Windshield washer fluid is 40% Methanol. (Winter Blend)
It is not explosive. I use to inject it right after turbo to prevent detonation and get more octane using only pump gas. I would go up to 28PSI of boost and 850 HP on pump gas and with a little V6. The race meth/water or even Smurf juice works great! I had a second Meth tank and pump and computer just for that system.
I use to mix my own blend in the garage, or I'd use the smurf stuff in a pinch. Funny huh?
Thanks for the warning, I did kinda forget about the sparks.
That makes me get more excited about milling. I love sparks and danger!
I just ordered my tools from Emuge/Franken.
I'm trying both Torus and Ball mills. I think I already know the answer as to which one is cheaper. The Torus.
We will try 2mm, 1.5mm, 1mm, then .6mm in ball mills first.
I think I need to get larger than 2mm for the roughing, but just havn't ordered yet.
Also bought 2mm, 1.5mm, 1mm, and .5 torus burs.
d2 will be 1/10 of diameter of tool, so 2mm tool can go max of .2mm Z-depth increments. I think we will do around a 700 feedrate, or about a little less than 1/2 of the feed of Zirconia.
X-Y Stepover will be 50% with the ball, and up to 80% with the torus.
A mill may be able to crank out 30-35 units a day. Thats about it I think. Not too many. Need more mills~! Looking at Haas Office mills.