Origin Scanners..Getting Voids on Adjacent Teeth ?

[NicelyMKV]

his IQ is to high to join, sorry.

Haaaa!!! True, I think it's in the double digits?

 

[paulg100]

Even if it was 1 you weren't dumb enough to buy into that POS system like me, so its to high :nerd:

 

[NicelyMKV]

Even if it was 1 you weren't dumb enough to buy into that POS system like me, so its to high :nerd:

On the contrary my friend. My dumb a$$ did buy into it! About five years ago. I just pitched a monster fit after the first month and a half and made them take it back at 2% restocking fee. Oh, it gets better, I then purchased the cercon pos! It sat in a corner after the first year and I walked by and kicked the s#*t out of it once a week!

 

[paulg100]

lol ok i stand corrected!

now i know why you love the origin gear so much.

After craplab, anything else must be like heaven. Ill get there one day.

edit: on second thoughts, it takes a "special person" to use that system, or so we are told by the happy inlab users.
So we are just to dumb to use it.

If i ever start a craplab anonymous, you can share your story with the group

those two systems you mentioned are the two we have and still have to suffer with. There both at our production lab though. I dont have any cad cam now, just good old wax and a ptc carver, bliss.. comparatively speaking.

 

[rkm rdt]

I learned to play the piccolo 5 years ago.

 

[paulg100]

thats pretty laughable now too when you look back, but i guess thats technology for you.

we still have a procera mod40 that gets used occasionally for abutments.

dont mess with us, were at the forefront of cad/cam!

 

[charles007]

At the Forefront of cad/cam , thats the best post I've read all week lol

I still have a lower Universal anterior procera crown made off a piccalo... the crown does a 360 on the die, I guess its made to fit more than one model since they were sold to thousands of other labs..
May put on ebay with my emax sprue buttons..

 

[dmonwaxa]

I learned to play the piccolo 5 years ago.

So you ready for a full grown tuba yet?,,,hehehehehehe

Rob's gonna like this. I got your 6 Rob

 

[rkm rdt]

So you ready for a full grown tuba yet?,,,hehehehehehe

Rob's gonna like this. I got your 6 Rob

I knew that was on the horizon!

 

[rkm rdt]

At the Forefront of cad/cam , thats the best post I've read all week lol

I still have a lower Universal anterior procera crown made off a piccalo... the crown does a 360 on the die, I guess its made to fit more than one model since they were sold to thousands of other labs..
May put on ebay with my emax sprue buttons..

I think the dust cover is worth more than the scanner.

 

[TheLabGuy]

So you ready for a full grown tuba yet?,,,hehehehehehe

Rob's gonna like this. I got your 6 Rob