Need help please.

[Sevan P]

Hey implant gurus

External hex internal wall to wall measures around 2.36mm. Here are some pics and and x Ray. Bio 3i ossio external doesn't fit, screw is to big.

Thoughts?

Thanks in advance.

Sent from my SM-N950U using Tapatalk

 

[fayzxx]

More details please


Sent from my iPhone using Tapatalk

 

[Sevan P]

Placed roughly 10yrs ago on Europe. Other then that what else you need?

Sent from my SM-N950U using Tapatalk

 

[zero_zero]

Looks kinda like a Branemark...

 

[JMN]

I don't have one on hand to measure, but would a Nobel Branemark or Speedy work?

Edit:The hex height is listed as .7mm in the catalog, but it doesn't give face to face dimensions on any of them.

Edit again: I don't think it is a Branemark, the screw tip is wrong. But it might be a knockoff.

 

[JMN]

Hey implant gurus

External hex internal wall to wall measures around 2.36mm. Here are some pics and and x Ray. Bio 3i ossio external doesn't fit, screw is to big.

Thoughts?

Thanks in advance.

Sent from my SM-N950U using Tapatalk

http://osseosource.com/dental-impla...7=not&12=not&3=not&10=not&13=not&4=not&40=194

There are only six options listed in that search for yellow color code and ext hex. I'm guessing it's the Phibo made in Spain. And could be totally so far off base that I'm not even in the stadium, but see what you think.

 

[DESS-USA]

Here is a write up with the dimensions of 3 external hex systems Branemark, 3i and BioHorizons shows the measurements -
https://www.dess-usa.com/faq-compatibility/#9

If you have any screw information then check this document out since we have the measurements of the screws for these systems and you can possibly deduct what it is.

 

[DESS-USA]

 

[Davethedentist]

I think zero_zero might be onto something with branemark.

Take a look here:

http://whatimplantisthat.com/?company_id=0&page=1&ft=13,24

 

[Sevan P]

Yeah being placed in Europe 10 years ago, most likely a branemark. Got a impression coping and analog on the way.

Sent from my SM-N950U using Tapatalk

 

[cadfan]

I would say 3 i the only company with gold nitrit parts that time in Europe if not individual done !!?? and that time same size as Branemark except on 5 mm if i remeber it wright

 

[Sevan P]

3i is also the only one that has a screw with that little guide nub on the end.

Sent from my SM-N950U using Tapatalk