Exo cement parameters

[user name]

I want to get just a bit more cement space/ passive fit.

If more is needed all around, rather than adding to occl and X/Y axis in advanced parameters, would it just be the same result to increase ''gap thickness of cement'? I think so, but Im questioning everything...Im not going to make assumptions.

If you dont mind sharing, what are you using for your spacing?

My default gap is 0.025
Add distance occl 0.07
Add distance X/Y 0.05

I dont understand why both occl and X/Y have added values.

If my math is correct, I would add the gap- 0.025+ the X/Y 0.05 and have a gap of 0.075, then no added X/Y in advanced parameters but only add occl 0.02 (the difference between current X/Y and occl values).

 

[2thm8kr]

Pm sent

 

[zero_zero]

Pm sent

X2

 

[user name]

Pm sent

X2

Thanks, but now Im even more lost. Those are some very divergent numbers. I would be curious for you two to share your numbers with each other.

 

[zero_zero]

I've sent mine to 2th...

 

[2thm8kr]

Thanks, but now Im even more lost. Those are some very divergent numbers. I would be curious for you two to share your numbers with each other.

They are not really that different.

 

[charles007]

Zirconia setting 3/4 axis
Gap thickness 0.065
add dist occ 0.02
add X/Y 0.02
begin cem gap 1
Setting using the newest Exocad Update if that matters

 

[esamuelr]

Defaults are starting points. If you're converting from one design system to the next realize that your mills and cam setting choices will be optimized to match those parameters. If they are too tight find a middle ground between what you have and what others offer and go for it. Each system will need to be tweaked to meet the user and ultimately the client dr's expectations.
Hopefully, we can all agree no ones settings will be the same on all cases, let alone all designs systems or mills.


Sent from my iPhone using Tapatalk