O
Oraldesignbn
Member
- Messages
- 1
- Reaction score
- 0
Does anyone know where to get this part for dwx-50? It is no longer manufactured. The machine has been refurbished and it would be a shame to throw them away now.
double check with a Roland reseller like whipmix....some of the parts for the 50 are the same as the 51 and 52.Does anyone know where to get this part for dwx-50? It is no longer manufactured. The machine has been refurbished and it would be a shame to throw them away now.
Roland ASSY, SPINDLE BASE DWX-50- 6701469040
i am actually considering selling my workhorse 51D currently for similar reasons. can still get some parts that are interchangeable with the 52s, so that helps50s are gonna be tough to keep running at this point, they don't have much commonality with the 51s onwards wrt parts.
I recommend looking out for a second -50 for sale, even a broken one- you can cannibalize the old one to keep yours running, and you can get all these parts for real cheap if you find a machine someone's just looking to get rid of. We have two dwx-4s facing the same problem, and we might do the same there, part out one of them to keep the second in good working order.
Hello Oraldesignbn. My name is Jane Qi, customer service specialist for DGSHAPE A Roland company. Nice to e-meet you.Does anyone know where to get this part for dwx-50? It is no longer manufactured. The machine has been refurbished and it would be a shame to throw them away now.
Roland ASSY, SPINDLE BASE DWX-50- 6701469040
the venn diagram of people who use roland to mill dental crowns vs the people who can draw their part and program a MAZAK or GROB mill to cut an industrial part is an overlap of like 6 people in the entire continental USA and Canada.Is very difficult since there is no support, why you don’t try mill it in a cnc
I need your help on my DWX 50. It was running good for 3000 hours. Recently it makes some noise when motor start.Hello Oraldesignbn. My name is Jane Qi, customer service specialist for DGSHAPE A Roland company. Nice to e-meet you.
Where is your business located in? We have a service support partner Greg Everett at Denteon, who support DGSHAPE products for several years in US. He probably can assist you with. If you think this plan works for you, I can send you his contact information through inbox. Thank you.
Hello komul9876,I need your help on my DWX 50. It was running good for 3000 hours. Recently it makes some noise when motor start.
Still milling good. I think I need to change spindle. Do you know someone who can do that for me in my lab. My lab located in Bogota N.J 07603.
Thank you. 9178626580
[email protected]
Please send me his contact to my email or call me. Thank you so much.Hello komul9876,
Thanks for reaching out to me. We have a service support partner Greg Everett at Denteon, who support DGSHAPE products for several years in US. He probably can assist you with. If you think this plan works for you, I can send you his contact information through inbox. Thank you.
Hello komul9876, the contact information as well as the service contents have been sent through email. Should you need further information, please feel free to reach out again. Thank you.Please send me his contact to my email or call me. Thank you so much.