DEKEMA baSiC Programming

[user name]

Im picking my way through this, but its an odd way of programming.

I need a cycle for Beyond Plus.

So far Im thinking...

Co Lo To10.A1000 L9 ...and that's as far as I got and Im not sure about that.

Anyone have the Greek figured out?

 

[JMN]

Im picking my way through this, but its an odd way of programming.

I need a cycle for Beyond Plus.

So far Im thinking...

Co Lo To10.A1000 L9 ...and that's as far as I got and Im not sure about that.

Anyone have the Greek figured out?

Have a pdf manual to share? Maybe I could lend a hand.

 

[user name]

Have a pdf manual to share? Maybe I could lend a hand.

Appreciated, but even you wouldn't crack this. Im comparing 2 current programs, but one records the temp based on the platform temp, the other on the chamber temp. Only problem I see is the thermocouple. It doesn't read a platform temp, so Im kinda lost. a similar program would be entered...

Co Lo To10.A1000 L9 To05.C1500 T7200 That's the heat up, but programming the cool down has me confused a bit too. Ugh.

I think it gets worse. I don't think it distinguishes between a zero and an O in print. Youre just supposed to know. ( )

And for frosting on the cake, when I was just looking at the programs, I think I accidentally deleted instead of just exiting.

Since we're having fun...the book says examples can be found at Dekema.com. Its in German. My computer wont translate the site.

 

[user name]

The code I need is to do this...

10/minute to 600 with the ramp open.
10/minute from 600 to 1000 with the ramp closed.
5/minute up to 1500.
Hold 2 hours.
Cool 5/minute to 1000.
Cool 10/minute to 250.

 

[JMN]

I can getnthere and get the pdf with the data, but I cant get a link to give you while away from a real pc.

The program for origen beyond and beyond plus both is:

C0 L0 T020.A1000 L9 T010.C1500 T5400 T020.A250 C0L0

Straight off the pdf. Go to www.dekema.com/service

drop down boxes from top to bottom, make them read:
pdf
sintern
Autromat baSiC
ORIGEN
english

And the click the pic to the right of the drop downs, a pdf will open/download with the chart.

That's where I got this codestring.

 

[user name]

I can getnthere and get the pdf with the data, but I cant get a link to give you while away from a real pc.

The program for origen beyond and beyond plus both is:

C0 L0 T020.A1000 L9 T010.C1500 T5400 T020.A250 C0L0

Straight off the pdf. Go to www.dekema.com/service

drop down boxes from top to bottom, make them read:
pdf
sintern
Autromat baSiC
ORIGEN
english

And the click the pic to the right of the drop downs, a pdf will open/download with the chart.

That's where I got this codestring.

Thanks for finding that. Its not right, but close enough I can enter the correct numbers from there.
Thank you.

 

[JMN]

Thanks for finding that. Its not right, but close enough I can enter the correct numbers from there.
Thanks you.

 

[user name]

If you can tell me what those mean, youll win a prize.

Smarty pants.

 

[JMN]

Co cold open
L# tray closure level in 10 steps. 0=open fully, 9 = closed fully
A cclimate to###
T time in seconds

C### hold temp
T## after a C## is how long it has to be at the c commanded temp, then...
T## at the end of the 'sentance' is how long it has to get to the startpoint of the next 'sentance'

Cryptography is fun.

Really was just trying to give you a high five, but didn't see it, so a thumbs up worked.

 

[JKraver]

Thank God I do dentures.

 

[ps2thtec]

Im picking my way through this, but its an odd way of programming.

I need a cycle for Beyond Plus.

So far Im thinking...

Co Lo To10.A1000 L9 ...and that's as far as I got and Im not sure about that.

Anyone have the Greek figured out?

Was told that you can download from dekima site to a Zip drive almost all sinter cycles. Just repeating what a friend told me today.

 

[kristian]

C0 L9 T030.C075 T0120 C0 L0 to warm up your cup of coffee.

 

[esamuelr]

The code I need is to do this...

10/minute to 600 with the ramp open.
10/minute from 600 to 1000 with the ramp closed.
5/minute up to 1500.
Hold 2 hours.
Cool 5/minute to 1000.
Cool 10/minute to 250.

C0 L0 T010.A600 L9 T010.C1000 T005.C1500 T7200 T005.A1000 T010.A250 C0 L0



Sent from my LGLS775 using Tapatalk

 

[Joe]

We got our Dekema usic from Jensen. I usually just make them figure it out and tell me what to enter. I can do it myself, but I'm offended that I am forced to put up with that nonsense.