Taper shank: JBS4002 15T 7/24 taper. Pull stud: JBS4002 15P
I found this....what is it? Never heard of this system?Where does one go out and find collets and stuff?
Hi Scot,
There are 4 versions of the 540. Base (MDX-540),Base + High Precision Ball Screws (MDX-540S),Base + Automatic Tool Changer (MDX-540A),and the works (MDX-540SA). The S models have an ultra smooth surface finish and higher repeat accuracy than the standard models. The rotary 4th axis is an option on all of the 540 mills.
You can buy collets and tool holders from Roland dealers or our
online store. The ATC models use different collets than the non-ATC models.
ATC collets: (part numbers and sizes)
US-COL7-1/8 (1/8” flex collet for MDX-540A & MDX-540SA)
US-COL7-5 (3/16” flex collet for MDX-540A & MDX-540SA)
US-COL7-1/4 (1/4” flex collet for MDX-540A & MDX-540SA)
US-COL7-3 (2.5 – 3.0mm flex collet for MDX-540A & MDX-540SA)
US-COL7-6 (5.0 – 6.0mm flex collet for MDX-540A & MDX-540SA)
Non-ATC collets:
US-EY16-3.5A (1/8” flex collet for MDX-540 & MDX-540S)
US-EY16-5A (3/16” flex collet for MDX-540 & MDX-540S)
US-EY16-7A (1/4” flex collet for MDX-540 & MDX-540S)
US-EY16-10A (3/8” flex collet for MDX-540 & MDX-540S)
US-EY16-3.5A (3.0 - 3.5mm flex collet for MDX-540 & MDX-540S)
US-EY16-5A (4.0 - 5.0mm flex collet for MDX-540 & MDX-540S)
US-EY16-7A (6.0 - 7.0mm flex collet for MDX-540 & MDX-540S)
US-EY16-8A (7.0 - 8.0mm flex collet for MDX-540 & MDX-540S)
US-EY16-10A (9.0 - 10.0mm flex collet for MDX-540 & MDX-540S)
4 tool holders come with the 540A and 540SA models. You can also buy them from our online store.