Multi shaded Zr - Bleach shades

[Contraluz]

Good day, y'all

Who, besides Katana and Ivoclar, offers Multi layered/shaded Zirconia in Bleach Shades?

Ivoclar's is a BL1 and Katana, too, has only one bright shade. I need it for a smaller three unit bridge.

Thanks in advance,

M

 

[PRO ARTS DL]

Zolid FX ML has a "B0" and "A0" shades

 

[lcmlabforum]

But the puck is only for AG, right?
I know they make adaptor for Katana, not sure will work other direction going into other mills?
LCM

 

[PRO ARTS DL]

They sell it both in 71mm (D-shape) and also 98mm with a step (Circular)

 

[Contraluz]

Thanks for the replies!

98mm with a step (Circular)

My Wieland Mini takes 98.5, if I am not mistaken. I guess the 98 won't fit?

M

 

[PRO ARTS DL]

I believe 98 and 98.5 is the same.

 

[Car 54]

Thanks for the replies!


My Wieland Mini takes 98.5, if I am not mistaken. I guess the 98 won't fit?

M

As Pro Arts said, it will work. The difference if any is so small, you won't even notice it. From one mini user to another

 

[Contraluz]

Thanks for the input!

Now, shade wise, from what I gather by looking at CAP's online shop, the lightest shade is 0/A1. From your (users) experience, would I be able to get a OM3 ish shade?

 

[A. M.]

Yes you will

 

[Contraluz]

Yes you will

Thanks!

Ordered a puck. Had to get the 22mm due to the hight of the bridge...

 

[Contraluz]

As Pro Arts said, it will work. The difference if any is so small, you won't even notice it. From one mini user to another

So, I got the puck! Would you happen to know what program I should use on the Programat S1? I have the 1600.

Thanks!

M

 

[adamb4321]

Pritidenta make a multiplayer bleach disc

 

[Car 54]

So, I got the puck! Would you happen to know what program I should use on the Programat S1? I have the 1600.

Thanks!

M

Whose, what 22mm puck did you end up in getting?

 

[Contraluz]

Whose, what 22mm puck did you end up in getting?

The Ag Zolid FX ML

 

[Car 54]

I have no idea on that one. Hopefully someone will answer your thread.
edit: it looks like Pro Arts has

 

[A. M.]

I don't know your furnice, I have a Ceramill Therm S...
But here is the sintering temp:
Heat rate 8C/min, up to 1450C, hold for 2 hours, cool with 15C/min to 250C
Hope it helps

 

[Contraluz]

I don't know your furnice, I have a Ceramill Therm S...
But here is the sintering temp:
Heat rate 8C/min, up to 1450C, hold for 2 hours, cool with 15C/min to 250C
Hope it helps

It sure does, thanks!

M