E
ecotan
New Member
- Messages
- 3
- Reaction score
- 0
If a workflow is validated by a manufacturer (e.g., KeyPrint KeySplint Soft),is there any difference in terms of product safety (specifically biocompatibility) when it comes to which printer and wash/cure station is used? The Elegoo Mars 3 Pro for example is extremely affordable, and so is the Mercury Plus wash/cure. Both have validated workflows. The Phrozen Mini 4K is also listed along with the Phrozen wash/cure (and seems to be popular on this forum) but that printer is discontinued, and the Phrozen Mini 8K is not validated yet.
The build platform, resin vat, and non-stick liners are components that will touch and interact with the resin. Do these have an impact on the cured resin? Do they release any chemicals? I can't think of anything else, outside of consistency of LED lights that will impact the end product in terms of biocompatibility.
I have very low volume production so the Elegoo Mars 3 Pro or Phrozen mini 8K, (if it was validated) for example will be ideal.
The build platform, resin vat, and non-stick liners are components that will touch and interact with the resin. Do these have an impact on the cured resin? Do they release any chemicals? I can't think of anything else, outside of consistency of LED lights that will impact the end product in terms of biocompatibility.
I have very low volume production so the Elegoo Mars 3 Pro or Phrozen mini 8K, (if it was validated) for example will be ideal.