RileyS
Well-Known Member
Full Member
- Messages
- 2,875
- Reaction score
- 461
They are all pretty thick. I think I'll go the LT Route.Hi Riley,
I have to ask how thick (on average) are the restorations? If they are in the 1.2-1.8mm range I would go with the ingot selection wheel, as that is taking into account the translucency level of the ingot at those thicknesses. If they are 1.9 or greater the thickness is going to block out the prep pretty well and then you could go with either the LT C1 or the LT D2 (whichever you feel is closer). I would always err on the side of lighter and brighter, though. This gives you room to adjust if necessary.
Thanks everbody