CEREC and USB 2.0

[silvares]

HI,

Thank you for your reply

can you be more specific? what is the tricky chip that you mentioned?

cant I just connect the framegrabber to the motherboard using the cables?

I bought a framegrabber a while ago but it didnt came with the cables, that's why I was asking if someone have pics from the inside of an ac computer...

 

[Rosario Agro]

HI,

Thank you for your reply

can you be more specific? what is the tricky chip that you mentioned?

cant I just connect the framegrabber to the motherboard using the cables?

I bought a framegrabber a while ago but it didnt came with the cables, that's why I was asking if someone have pics from the inside of an ac computer...

Hi! Sorry for my silence: I was on vacation.
Write me on my e-mail: [email protected], and I'll tell you what to do.

 

[silvares]

Hi! Sorry for my silence: I was on vacation.
Write me on my e-mail: [email protected], and I'll tell you what to do.

Hi Rosario,

Hi have tried to contact you throw your email but without success.....

If you have the time, please write me on my email:

[email protected]

your help will be more than welcome, as I am still trying to sort everything out

Many thanks

Silvares

 

[javiasorey]

Forget the USB - use the ExpressCard Slot of your laptop

Hi folks,
you can do following:
1. Get a PCI expansion chassis (i.e. Magma) ($500-$1500)
2. Connect the PCI expansion chassis to the laptop's PCMCIA/ExpressCard34/54 slot
3. Put a Cerec Frame Grabber Card ($300) into the PCI expansion chassis
4. Connect a Cerec Camera($1000) & enjoy the mobility
An extra benefit is that by putting the Cerec Frame Grabber Card into the external chassis you take the heat away from the laptop
By doing this you get a Cerec Acquisition Unit for less then $3000 + the cost of a good laptop - and you have a fully mobile setup - not the original Cerec cart
If you feel you can't do this by yourself - feel free to contact me

Forget the USB - use the ExpressCard Slot of your laptop

Hi folks,
you can do following:
1. Get a PCI expansion chassis (i.e. Magma) ($500-$1500)
2. Connect the PCI expansion chassis to the laptop's PCMCIA/ExpressCard34/54 slot
3. Put a Cerec Frame Grabber Card ($300) into the PCI expansion chassis
4. Connect a Cerec Camera($1000) & enjoy the mobility
An extra benefit is that by putting the Cerec Frame Grabber Card into the external chassis you take the heat away from the laptop
By doing this you get a Cerec Acquisition Unit for less then $3000 + the cost of a good laptop - and you have a fully mobile setup - not the original Cerec cart
If you feel you can't do this by yourself - feel free to contact me

hi karmen it works for a normal pc? im trying to make a custom bluecam scanner, if i connect the framegrabber to the pci slot and install cerec sw on windows with a dongle it could work? thanks!